© Semiconductor Components Industries, LLC, 2014

December, 2016 − Rev. 15

1

Publication Order Number:

NOII4SM6600A/D

NOII4SM6600A

6.6 Megapixel CMOS Image

Sensor

Features

Read out (NDR)

Applications

Description

The IBIS4-6600 is a solid-state CMOS image sensor that integrates complete analog image acquisition, and a digitizer and

digital signal processing system on a single chip. This image sensor has a resolution of 6.6 MPixel with 2210 x 3002 active

pixels. The image size is fully programmable for user-defined windows. The pixels are on a 3.5

mm pitch.

The user programmable row and column start and stop positions enable windowing down to 2x1 pixel window for digital

zoom. Subsampling reduces resolution while maintaining the constant field of view. The analog video output of the pixel

array is processed by an on-chip analog signal pipeline. Double Sampling (DS) eliminates the fixed pattern noise.

The programmable gain and offset amplifier maps the signal swing to the ADC input range. A 10-bit ADC converts the

analog data to a 10-bit digital word stream. The sensor uses a three-wire Serial-Parallel (SPI) interface. It operates with a

single 2.5 V power supply and requires only one master clock for operation up to 40 MHz. It is housed in a 68-pin ceramic

LCC package.

This data sheet enables the development of a camera system, based on the described timing and interfacing given in the

following sections.

ORDERING INFORMATION

Marketing Part Number

Description

Package

NOII4SM6600A-QDC

Mono with Glass

68 pin LCC

NOTE: For more information, see Ordering Code Definition on page 29.

www.onsemi.com

Figure 1. IBIS4−6600 Image Sensor