INA4180 (quad-channel)

INA4180 (quad-channel)

INA2180 (dual-channel)

INA180 (single-channel)

2.7 V to 5.5 V

ADC

Microcontroller

Up To 26 V

GND

VS

Load

IN±

IN+

OUT

+

±

0.1 µF

Copyright © 2017, Texas Instruments Incorporated

Product

Folder

Order

Now

Technical

Documents

Tools &

Software

Support &

Community

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION

DATA.

INA180, INA2180, INA4180

SBOS741B – APRIL 2017 – REVISED NOVEMBER 2017

INAx180 Low- and High-Side Voltage Output,

Current-Sense Amplifiers

1

1 Features

1

•

•

High Bandwidth: 350 kHz (A1 Devices)

•

Offset Voltage:

–

–

•

Output Slew Rate: 2 V/µs

•

Accuracy:

–

±1% Gain Error (Max)

–

1-µV/°C Offset Drift (Max)

•

Gain Options:

–

20 V/V (A1 Devices)

–

50 V/V (A2 Devices)

–

100 V/V (A3 Devices)

–

200 V/V (A4 Devices)

•

Quiescent Current: 260 µA Max (INA180)

2 Applications

•

Motor Control

•

Battery Monitoring

•

Power Management

•

Lighting Control

•

Overcurrent Detection

•

Solar Inverters

3 Description

The INA180, INA2180, and INA4180 (INAx180)

current sense amplifiers are designed for cost-

optimized applications. These devices are part of a

family of current-sense amplifiers (also called current-

shunt monitors) that sense voltage drops across

current-sense resistors at common-mode voltages

from –0.2 V to +26 V, independent of the supply

voltage. The INAx180 integrate a matched resistor

gain network in four, fixed-gain device options: 20

V/V, 50 V/V, 100 V/V, or 200 V/V. This matched gain

resistor network minimizes gain error and reduces the

temperature drift.

All these devices operate from a single 2.7-V to 5.5-V

power supply. The single-channel INA180 draws a

maximum supply current of 260 µA; whereas, the

dual-channel INA2180 draws a maximum supply

current of 450 µA, and the quad channel draws a

maximum supply current of 900 µA..

The INA180 is available in a 5-pin, SOT-23 package

with two different pin configurations. The INA2180 is

available in an 8-pin VSSOP package. The INA4180

is available in a 14-pin TSSOP package. All device

options are specified over the extended operating

temperature range of –40°C to +125°C.

Device Information(1)

PART NUMBER

PACKAGE

BODY SIZE (NOM)

INA180

SOT-23 (5)

2.90 mm × 1.60 mm

INA2180(2)

VSSOP (8)

3.00 mm × 3.00 mm

INA4180(2)

TSSOP (14)

5.00 mm × 4.40 mm

(1) For all available packages, see the package option addendum

at the end of the datasheet.

(2) INA2180 and INA4180 are preview devices.

Typical Application Circuit