Series KP

Miniature Audio/Video Pushbuttons

D36

D

www.nkkswitches.com

Electrical Capacity (Resistive Load)

Low Level:

100mA maximum @ 12V DC

Other Ratings

Contact Resistance:

200 milliohms maximum

Insulation Resistance:

100 megohms minimum @ 250V DC

Dielectric Strength:

1,000V AC minimum between contacts for 1 minute minimum

1,500V AC minimum between contacts & case for 1 minute minimum

Mechanical Life:

5,000,000 operations minimum;

1,000,000 operations minimum for custom Rectangular Switch/Cap Assembly (at center of cap)

Electrical Life:

5,000,000 operations minimum

Nominal Operating Force:

KP01: 1.9N maximum for Tactile & Nontactile models (at center of cap)

KP02: 1.6N maximum for Tactile, Nontactile & Tactile/Audible models (at center of cap)

Travel:

KP01: Pretravel .122” (3.1mm); Overtravel .055” (1.4mm); Total Travel .177” (4.5mm)

KP02: Pretravel .091” (2.3mm); Overtravel .047” (1.2mm); Total Travel .138” (3.5mm)

Materials & Finishes

Plunger/Upper Housing:

Polyacetal

Lower Housing:

Glass fiber reinforced PBT (UL94V-0)

Movable Contact:

Stainless steel with gold plating

Stationary Contacts:

Gold over copper alloy

Switch Terminals:

Brass with tin plating

Environmental Data

Operating Temperature Range:

–25°C through +50°C (–13°F through +122°F)

Humidity:

90-95% humidity for 240 hours @ 40°C (104°F)

Vibration:

10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning

in 1 minute; 3 right angled directions for 2 hours

Shock:

Installation

Cap Installation Force :

50.0N maximum downward force on actuator

PCB Processing

Soldering:

Wave Soldering. See Profile A in Supplement section.

Manual Soldering. See Profile A in Supplement section.

Cleaning:

These devices are not process sealed. Hand clean locally using alcohol based solution.

Standards & Certifications

Flammability Standards:

UL94V-0 lower housing

The KP Series pushbuttons have not been tested for UL recognition or CSA certification.

These switches are designed for use in a low-voltage, low-current, logic-level circuit.

When used as intended in a logic-level circuit, the results do not produce hazardous energy.