PI5C3253

Dual 4:1 Mux/DeMux Bus Switch

2

PS7017C

09/14/04

Storage Temperature ......................................................... –65°C to +150°C

Ambient Temperature with Power Applied ........................ –40°C to +85°C

Supply Voltage to Ground Potential (Outputs & D/O Only)–0.5V to +7.0V

DC Input Voltage ................................................................. –0.5V to +7.0V

DC Output Current............................................................................ 120mA

Power Dissipation ................................................................................ 0.5W

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the

device. This is a stress rating only and functional operation

of the device at these or any other conditions above those

indicated in the operational sections of this specification is

not implied. Exposure to absolute maximum rating condi-

tions for extended periods may affect reliability.

Parameters Description

Min.

Input HIGH Voltage

Guaranteed Logic HIGH Level

2.0

V

Input LOW Voltage

Guaranteed Logic LOW Level

–0.5

0.8

Input HIGH Current

±1

µA

Input LOW Current

±1

High Impedance Output Current

±1

Clamp Diode Voltage

–0.7

–1.2

V

100

mA

Input Hysteresis at Control Pins

150

mV

5

7

Ω

10

15

Description

Test Conditions

Typ.

Max.

Units

Input Capacitance

6

pF

6

24

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. Measured by the voltage drop between I and Y pin at indicated current through the switch. ON resistance is determined by

the lower of the voltages on the two (I,Y) pins.

5. This parameter is determined by device characterization but is not production tested.

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)