Document Number: 42032

Revision 17-Nov-03

www.vishay.com

96

Type 103P

Vishay Sprague

For technical questions, contact spresale@vishay.com

Paper Capacitors

Metal Case, Film/Foil, 10 Ampere

Thru-Pass, Subminiature

FEATURES

• Bulkhead mounting

• Excellent RFI specifications

• Hermetically encased

• Low inductance connection

• Low insertion loss

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55°C to + 125°C.

Capacitance Range: 0.001µF to 1.0µF.

Capacitance Tolerance: ± 20%, ± 10%.

Voltage Rating: 200 WVDC to 600 WVDC.

Current Rating: 10 ampere maximum.

Dissipation Factor: 1.0% maximum.

DC Resistance: 0.01 ohm maximum.

Voltage Test: 200% of rated voltage for 1 minute.

Insulation Resistance: At + 25°C: 20,000 Megohm -

Microfarads or 30,000 Megohm minimum. At + 85°C:

200 Megohm - Microfarads or 300 Megohm minimum.

DC Life Test: 140% of rated voltage for 250 hours

@ + 125°C. No open or short circuits. No visible damage.

Maximum ∆ Cap.: ± 5%. Minimum I.R. = 30% of initial

limit. Maximum D.F. = 1.5%.

Moisture Resistance: MIL-STD-202, Method 106E,

10 cycles. No visible damage. Maximum ∆ Cap.: ± 5%.

Minimum I.R. = 30% of initial limit. Maximum D.F. = 1.5%.

Thermal Shock and Immersion Cycling: No visible

damage. Maximum ∆ Cap.: ± 5%. Minimum I.R. = 30% of

initial limit. Maximum D.F. = 1.5%.

ENVIRONMENTAL CHARACTERISTICS

Vibration Test (Condition A): No mechanical damage,

short, open or intermittent circuits.

PHYSICAL CHARACTERISTICS

Lead Pull: 5 pounds (2.3 kilograms) for one minute.

No physical damage.

Lead Bend: After three complete consecutive bends,

no damage.

capacitance and voltage.

DIMENSIONS in inches [millimeters]

Circuit

Diagram

1.625 + 1.000 - 0.0

[41.28 + 25.40 - 0.0]

0.125

[3.18

L

External

Toothed

Lockwasher

Pt. No. 2-123

0.040 + 0.004 - 0.001

[1.02 + 0.10 - 0.02]

Dia.

No. 18 AWG

Solid Tinned Leads

0.125 [3.18]

Max.

0.437

[11.10

Across Flats

D

+ 0.015 [0.38]

- 0.005 [0.130]

Dia.

Nut

5/16 [7.938]

24 UNF-2A

Pt. No. 6-113

Straddle Milled Flats

on Thread for Locking

on Mounting Surface

0.255 [6.48]

0.250 [6.35]

Across Flats

0.312

[7.92

1.625 + 1.000 - 0.0

[41.28 + 25.40 - 0.0]