© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com

C1074_HT_X7R_RADIAL_MOLDED • 8/10/2016

3

Radial Through-Hole Multilayer Ceramic Capacitors

High Temperature 200°C, Radial, Molded, X7R Dielectric, 50 – 200 VDC (Industrial Grade)

Qualification

These devices are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 2,

Performance & Reliability.

Environmental Compliance

RoHS compliance is dependent upon series and rated capacitance value.

Series

Rated

Capacitance

RoHS

Compliant

RoHS Exemption

Halogen Free

C052H

All

Yes

7(a)

Yes

C062H

< 0.27µF

Yes

7(a)

Yes

C062H

≥ 0.27µF

No

n/a

Yes

1

7(a): Lead in high melting temperature type solders

Electrical Parameters/Characteristics

Item

Parameters/Characteristics

Operating Temperature Range

−55°C to +200°C

Capacitance Change with Reference to

+25°C and 0 VDC Applied (TCC)

±15% (−55°C to +125°C), +15%/−55% (200°C)

Capacitance Change with Reference to

+25°C and 100% Rated VDC Applied

+15%/−30% (−55°C to +125°C), +15%/−60% (200°C)

Aging Rate (Maximum % Cap Loss/Decade Hour)

3%

Dielectric Withstanding Voltage

250% of rated voltage

(5±1 seconds and charge/discharge not exceeding 50 mA at 25°C)

Dissipation Factor (DF) Maximum Limit at 25ºC

2.50%

Insulation Resistance (IR) Limit at 25°C

1,000 MΩ microfarads or 100 GΩ

(Rated voltage applied for 120±5 seconds)

Regarding aging rate: Capacitance measurements (including tolerance) are indexed to a referee time of 1,000 hours.

To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.

Capacitance and dissipation factor (DF) measured under the following conditions:

1 kHz ±50 Hz and 1.0 ±0.2 V

120 Hz ±10 Hz and 0.5 ±0.1 V

Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known

as Automatic Level Control (ALC). The ALC feature should be switched to "ON."

Post Environmental Limits

High Temperature Life, Biased Humidity, Moisture Resistance

Dielectric

Rated DC Voltage Capacitance Value

DF (%)

Capacitance Shift

IR

X7R

> 25

All

3.0

±20%

10% of Initial Limit