© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com

C1072_AXIMAX_X8L • 10/17/2016

8

Axial Through-Hole Multilayer Ceramic Capacitors

Aximax, 400 Series, Axial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial & Automotive Grade)

Symbol Reference Table

A

Component Pitch

B

Inside Tape Spacing

Tape & Reel Packaging Information

KEMET offers standard reeling of molded and conformally

coated axial leaded ceramic capacitors for automatic insertion

or lead forming machines in accordance with EIA standard

296. KEMET’s internal specification four-digit suffix, 7200, is

placed at the end of the part number to designate tape and reel

packaging, e.g., C410C104Z5U5CA7200.

Paper (50 lb.) test minimum is inserted between the layers

of capacitors wound on reels for component pitch ≤ 0.400".

Capacitor lead length may extend only a maximum of .0625"

(1.59 mm) beyond the tapes’ edges. Capacitors are centered in

a row between the two tapes and will deviate only ± 0.031" (0.79

mm) from the row center. A minimum of 36" (91.5 cm) leader

tape is provided at each finished length of taped components.

Universal splicing clips are used to connect the tape.

Table 3 – Ceramic Axial Tape and Reel Dimensions

Metric will govern

Dimensions — Millimeters (Inches)

Axial Capacitor

Body Diameter

A

±0.5 (0.020)

B

±1.5 (0.059)*

0.0 to 5.0

(0.0 to 0.197)

5.0 (0.197)

52.4 (2.062)

* Inside tape spacing dimension (B) is determined by the body diameter of the capacitor.