LPS100-M Series Data Sheet

Environmental Specifications

Operating temperature

0° to 50 °C ambient derate each output as 2.5% per degree from 50° to 70 °C. -20 °C start up

Storage temperature

-40 °C to +85 °C

Electromagnetic susceptibility

Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3

Humidity

Operating; non-condensing 10% to 95% RH

Vibration

IEC 60068-2-6 to the levels of IEC721-3-2

MTBF calculated

534,000 hours at full load and 25 °C ambient conditions, 230 V input, Bellcore

Ordering Information

Model Number Output Voltage Minimum

Load

Maximum Load with

Convection Cooling

Maximum Load with

30CFM Forced Air

Peak Load

Ripple

LPS102-M

5 V

0 A

16 A

24 A

30 A

± 2%

50 mV

LPS103-M

12 V

0 A

8.3 A

12.5 A

14 A

± 2%

120 mV

LPS104-M

15 V

0 A

6.7 A

10 A

11 A

± 2%

150 mV

LPS105-M

24 V

0 A

4.2A

6.3 A

7A

± 2%

240 mV

LPS108-M

48 V

0 A

2.1A

3.1 A

3.5 A

± 2%

480 mV

LPS109-M

54 V

0 A

1.85 A

2.8 A

3.1 A

± 2%

540 mV

1. Peak current lasting < 30 seconds with a maximum 10% duty cycle.

2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.

3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.

4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be

operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to

OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users.

Pin Assignments

Connector

LPS100-M

SK1

Pin 1

Neutral

Pin 3

Line

SK2

Pin 1

Common

Pin 2

Common

Pin 3

Common

Pin 4

Common

Pin 5

+Vout

Pin 6

+Vout

Pin 7

+Vout

Pin 8

+Vout

SK203

Pin 1

Common

Pin 2

Power Fail

Pin 3

- Remote Sense

Pin 4

+ Remote Sense

SK5

Pin 1

+12 V Fan

Pin 2

+12 V Fan

Pin 3

Fan Return (Isolated)

Pin 4

Fan Return (Isolated)

Mating Connectors

AC Input (SK1)

Molex P/N: 09-50-3031, Pins: 08-52-0072 or

Landwin P/N: 3060S0302, Pins: 3360T011P

AC Ground

Molex: 01-90020001

DC Output

(SK2)

Molex P/N: 09-50-3081, Pins: 08-52-0072or

Landwin P/N: 3060S0802, Pins: 3360T011P

Remote Sense

(SK203)

Molex P/N: 35155-0400, Pins: 08-70-0056 or

Landwin P/N: 2640S04A0, Pins: 2543T011P

Fan: (SK5)

Molex P/N: 22-01-1042, Pins: 08-70-0049 or

Landwin: P/N: 2510S04A0, Pins: 2543T011P

Artesyn Embedded Technologies Connector Kit #70-841-025,

includes all of the above

Notes:

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ±.02”.

3. Mounting holes M1, M2 should be grounded for EMI purpose

4. Mounting M1 is safety ground connection

5. Specifications are for convection rating at factory settings at 115

Vac input 25 °C unless otherwise stated.

6. This power supply requires mounting on metal standoffs 0.20”

(5 m) in height.

7. For DC input an external DC safety rated fuse must be used.

8. Warranty: 2 years

9. Weight: 0.44 lb. / 0.20 kg