Cornell Dubilier

Typical Applications

Filtering Performance:

Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the

“Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming

and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at

the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without

any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain

applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of

operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute

any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any

guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation,

or operating environment. The Information is intended for use only by customers who have the requisite experience and capability

to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided

by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell

Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier

strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light

of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high

degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or

redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not

result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed,

the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety

measures may not be required.