STM32F100RD datasheet(38/106 Pages) STMICROELECTRONICS

Part #	STM32F100RD

Description	Clock, reset and supply management

Download	106 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

38 / 106 page

Electrical characteristics

STM32F100xC, STM32F100xD, STM32F100xE

38/106

DocID15081 Rev 10

5.3

Operating conditions

5.3.1

General operating conditions

Table 7. Current characteristics

Symbol

Ratings

Max.

Unit

IVDD

Total current into VDD/VDDA power lines (source)(1)

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power

supply, in the permitted range.

150

mA

IVSS

Total current out of VSS ground lines (sink)(1)

150

IIO

Output current sunk by any I/O and control pin

25

Output current source by any I/Os and control pin

−25

IINJ(PIN)(2)

2. Negative injection disturbs the analog performance of the device. See Note: on page 85.

Injected current on five volt tolerant pins(3)

3. Positive injection is not possible on these I/Os. A negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 6: Voltage characteristics for the maximum allowed input voltage

values.

-5 / +0

Injected current on any other pin(4)

4.

A positive injection is induced by VIN>VDD while a negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 6: Voltage characteristics for the maximum allowed input voltage

values.

± 5

ΣIINJ(PIN)

Total injected current (sum of all I/O and control pins)(5)

5. When several inputs are submitted to a current injection, the maximum

ΣIINJ(PIN) is the absolute sum of the

positive and negative injected currents (instantaneous values).

± 25

Table 8. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

–65 to +150

°C

TJ

Maximum junction temperature

150

°C

Table 9. General operating conditions

Symbol

Parameter

Conditions

Min

Max

Unit

fHCLK

Internal AHB clock frequency

-

0

24

MHz

fPCLK1

Internal APB1 clock frequency

-

0

24

fPCLK2

Internal APB2 clock frequency

-

0

24

VDD

Standard operating voltage

-

2

3.6

V

VDDA(1)

Analog operating voltage

(ADC not used)

Must be the same potential

as VDD

23.6

V

Analog operating voltage

(ADC used)

2.4

3.6

VBAT

Backup operating voltage

-

1.8

3.6

V

Similar Part No. - STM32F100RD

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	STM32F100RDT6BTR	1Mb / 98P	High-density value line, advanced ARM-based 32-bit MCU
STMicroelectronics	STM32F100RDT7BTR	1Mb / 98P	High-density value line, advanced ARM-based 32-bit MCU

More results

Similar Description - STM32F100RD

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	ST72561XX	2Mb / 324P	Clock, reset and supply management January 2011 Rev 8
	STM32F410X8	1Mb / 142P	Clock, reset and supply management April 2017 Rev 5
	ST7MC1K2	5Mb / 371P	Clock, reset and supply management July 2007 Rev 1
	STM32F103CBT6	1Mb / 102P	Clock, reset and supply management
	STM32F103RCT6	1Mb / 130P	Clock, reset and supply management
	STM32F215XX	2Mb / 180P	Clock, reset and supply management August 2016 Rev 13
	STM32F401XD	2Mb / 135P	Clock, reset and supply management January 2015 Rev 3
	ST72361XX	2Mb / 279P	Clock, reset and supply management August 2010 Rev 3
	STM32L15XCC	1Mb / 136P	Reset and supply management March 2016 Rev 12
	STM32L053C6	1Mb / 132P	Reset and supply management October 2016 Rev 7

More results

STM32F100RD Datasheet(PDF) 38 Page - STMicroelectronics

STM32F100RD Datasheet(HTML) 38 Page - STMicroelectronics

Similar Part No. - STM32F100RD

Similar Description - STM32F100RD

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL