 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
CC1150RGVT Datasheet(PDF) 9 Page - Texas Instruments |
|
|
||||||||||||||||||||||||||||||
CC1150RGVT Datasheet(HTML) 9 Page - Texas Instruments |
|
|
9 / 67 page  CC1150 www.ti.com SWRS037B – JANUARY 2006 – REVISED MARCH 2015 Frequency Synthesizer Characteristics (continued) Tc = 25°C, VDD = 3.0 V if nothing else is stated. All measurement results obtained using the CC1150EM reference design (see [1] and [2]). PARAMETER MIN TYP MAX UNIT CONDITION @ 200 kHz offset from carrier, RF carrier phase noise –90 dBc/Hz carrier at 868 MHz @ 500 kHz offset from carrier, RF carrier phase noise –98 dBc/Hz carrier at 868 MHz @ 1 MHz offset from carrier, RF carrier phase noise –106 dBc/Hz carrier at 868 MHz @ 2 MHz offset from carrier, RF carrier phase noise –113 dBc/Hz carrier at 868 MHz @ 5 MHz offset from carrier, RF carrier phase noise –119 dBc/Hz carrier at 868 MHz @ 10 MHz offset from carrier, RF carrier phase noise –127 dBc/Hz carrier at 868 MHz Time from leaving the IDLE state until arriving in the FSTXON or TX state, when PLL turn-on / hop time 85.1 88.4 88.4 µs not performing calibration. Crystal oscillator running. Calibration can be initiated manually or XOSC 18739 automatically before entering or after leaving cycles TX. PLL calibration time Min/typ/max time is for 27/26/26 MHz crystal 694 721 721 µs frequency. 4.9 Analog Temperature Sensor (1) Tc = 25°C, VDD = 3.0 V if nothing else is stated. PARAMETER MIN TYP MAX UNIT CONDITION Output voltage at –40°C 0.651 V Output voltage at 0°C 0.747 V Output voltage at +40°C 0.847 V Output voltage at +80°C 0.945 V Temperature coefficient 2.45 mV/°C Fitted from –20°C to +80°C From –20°C to +80°C when using Absolute error in calculated temperature –2(2) 2(2) °C 2.45 mV / °C, after 1-point calibration at room temperature Current consumption increase when 0.3 mA enabled (1) It is necessary to write 0xBF to the PTEST register to use the analog temperature sensor in the IDLE state. (2) Indicated minimum and maximum error with 1-point calibration is based on simulated values for typical process parameters 4.10 DC Characteristics Tc = 25°C if nothing else stated. DIGITAL INPUTS/OUTPUTS MIN MAX UNIT CONDITION Logic "0" input voltage 0 0.7 V Logic "1" input voltage VDD – 0.7 VDD V Logic "0" output voltage 0 0.5 V For up to 4 mA output current Logic "1" output voltage VDD – 0.3 VDD V For up to 4 mA output current Logic "0" input current N/A –1 µA Input equals 0 V Logic "1" input current N/A 1 µA Input equals VDD Copyright © 2006–2015, Texas Instruments Incorporated Specifications 9 Submit Documentation Feedback Product Folder Links: CC1150 |
Similar Part No. - CC1150RGVT |
|
Similar Description - CC1150RGVT |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
