DS158 LUXEON XR-M Product Datasheet 20160106 ©2016 Lumileds Holding B.V. All rights reserved.

4

Absolute Maximum Ratings

Table 3 . Absolute maximum ratings for LUXEON XR-M .

PaRamEtER

maXImum PERFoRmancE

1050mA

1200mA

135°C

ESD Sensitivity

IEC 61000-4-2 Level 4 (8/15 kV contact/air discharge)

Operating Temperature at T

[4]

-40 to 85°C

LED Module Storage Temperature

-40 to 105°C

Reverse Voltage (V

LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 3:

1. Proper current derating must be observed to maintain the junction temperature below the maximum.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum

allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC Forward Current at the corresponding

maximum junction temperature.

3. Pulsed operation with a peak drive current equal to the stated Peak Pulsed Forward Current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.

4. Measured at T

5. Per IEC 62471, Ethr=770 lux.

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1: Typical normalized power vs . wavelength for LUXEON M at 700mA, T