Electronic Components Datasheet Search |
|
XP-4 Datasheet(PDF) 2 Page - Systemsensor advanced ideas. |
|
XP-4 Datasheet(HTML) 2 Page - Systemsensor advanced ideas. |
2 / 2 page 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 ©2011 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. A05-0205-009 • 3/11 • #2651 Accessories Ordering Information Part No. Description 5451 Fixed heat detector with rate-of-rise. Alarm point at 57.2°C (135°F). Must be mounted to one of the 400 Series Bases listed in Mounting Base Guide. Accessories RA100Z Remote annunciator for 2- or 4-wire systems, 3 to 32 V. Use with ion and photo plug-in detectors. Fits standard U.S. single-gang electrical box. MOD400R Detector sensitivity test tool. (See above.) Use with most analog or digital multimeters. Satisfies requirement of NFPA 72 for sensitivity testing. (See above.) EOLR-1 End of line relay for power supervision, 12/24 VDC, 4-wire only. DUST45 Replacement protective dust cover for plug-in 400 Series. M02-04-01 Test magnet. M02-09-00 Test magnet with 32-inch telescoping handle. XR5 Detector removal tool. Allows installation and/or removal of detector heads from base in high-ceiling installations. XP-4 Extension pole for XR5. Comes in three 5 ft. sections. The MOD400R Field Sensitivity Test Module can be used with any standard DC voltmeter or multimeter to check the sensitivity range of System Sensor’s detectors (satisfies NFPA 72 requirement for sensitivity testing). Wiring 1 2 3 4 (+) (–) (–) (+) (–) 1 2 3 4 (–) (+) (+) EOL RESISTOR (+) (–) (–) (+) (–) OPTIONAL OPTIONAL RA400Z/ RA100Z OPTIONAL FAULT TOLERANT WIRING RA400Z/ RA100Z B401 400 Series Plug-In Smoke Detector Specifications Physical/Operating Specifications Size 3.2˝ (8.1 cm) H; 4.0˝ (10.2 cm) Dia., unflanged base; 6.2˝ (15.7 cm) Dia., flanged base Weight 0.3 lb (136 g) Operating Temperature Range 32°F to 100°F (0°C to 38°C) Humidity Range 10% to 93% RH non-condensing Construction Flame retardant Noryl® plastic Alarm Point 135°F (57.2°C) or 15°F/min rate-of-rise Smoke Detector Spacing On smooth ceilings (as defined in NFPA 72), spacing of 50 feet (2500 sq ft) may be used. Other spacing may be used depending on ceiling height, high air movements, and other conditions or response requirements. Standby Current 100 µA maximum Operating Voltage/Alarm Current Mounting base dependent (see Mounting Base Selection Guide below) Mounting Base Selection Guide Base Model Number Version Loop Type Current Limit Resistor Alarm Contact Type Nominal Voltage Current Draw on Alarm (mA) B401† UL/EN-54 2-wire* No — 12/24 VDC†† 10 to 100** *Functionality contingent on panel compatibility. **Must be limited by control panel. † Flangeless base †† Although B401 bases are capable of operating at 12 and 24 VDC, they cannot be used with the 5451 in 12 V applications. Junction Box Selection Guide* Single Gang 3.5”Octagon 4”Octagon 4”Square 50 mm 60 mm 75 mm B401 No No No No Yes Yes No *Box depth contingent on base and wire size. Refer to National Electrical Code of local applicable codes for appropriate recommendations. |
Similar Part No. - XP-4 |
|
Similar Description - XP-4 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |