Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

408-10260 Datasheet(PDF) 1 Page - Tyco Electronics

Part No. 408-10260
Description  Insulated tap assemblies include a housing for protection from other components on the pc board.
Download  3 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  MACOM [Tyco Electronics]
Homepage  http://www.macom.com
Logo 

408-10260 Datasheet(HTML) 1 Page - Tyco Electronics

   
Zoom Inzoom in Zoom Outzoom out
 1 / 3 page
background image
Instruction Sheet
Installation and Removal
of Power Tap Assemblies
408-10260
LOC B
1 of 3
E2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
12 JAN 09 Rev A
(with Eye-of-the-Needle Contacts)
NOTE: Mounting Screw and Washer(s) Not Supplied by Tyco Electronics
Contacts
Housing
6-Position
Power Tap Assembly
10-Position
Power Tap Assembly
Straddle Mount
10-Position
Power Tap Assembly
Stand-Off
(4) Places
PROFILE
PART NUMBER
NUMBER OF
POSITIONS (Contacts)
CENTERLINE SPACING
mm [in.]
Standard
2057292-1
6
3.18 X 6.35 [.125 X .250]
Standard
2057293-1
10
3.18 X 6.35 [.125 X .250]
Straddle Mount
2057294-1
10
3.0 X 11.0 [.118 X .433]
Figure 1
1. INTRODUCTION
The Power Tap Assemblies (with Eye–of–the–Needle
Contacts ) listed in Figure 1 are designed to be
mounted onto a printed circuit (pc) board to provide
high current to the pc board. The taps can also be
connected to a bus bar or terminal. Read these
instructions thoroughly before installing any tap
assemblies.
Dimensions in this instruction sheet are in
millimeters[with inchesin brackets]. Figuresare
for reference only and are not drawn to scale.
2. DESCRIPTION (Figure 1)
Each tap assembly features a tap with six or ten
contacts. A screw is NOT included with the tap
assemblies.
Insulated tap assemblies include a housing for
protection from other components on the pc board.
The tap or housing has standoffs that are used for
inspection of proper seating on the pc board.
3. TOOLING
Customer supplied tooling for seating the Power Tap
Assemblies shall be designed using the dimensions
provided in Figures 2 and 3.
Make sure that the front and the sides of the
support block are parallel when installed in power
unit.
Power for seating taps must be provided by
application tooling capable of supplying a downward
force of 1780 Newtons (N) [400 lb]. The power unit
must have sufficient throat depth to accommodate
various positions on the pc board. In addition, the
power unit must have provision for ram adjustment to
prevent under– or over–insertion.
NOTE
i
NOTE
i


Html Pages

1  2  3 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn