408-1261

6 of 9

Rev K

Figure 8

Insert each insulation crimp adjustment pin into

position according to the following:

Make sure that both insulation crimp adjustment

pins are in the same position.

diameter.

diameter.

diameter.

5. MAINTENANCE AND INSPECTION

It is recommended that a maintenance and inspection

program be performed periodically to ensure

dependable and uniform terminations. Though

recommendations call for at least one inspection a

month, frequency of inspection depends on:

1. The care, amount of use, and handling of the tool.

2. The presence of abnormal amounts of dust and

dirt.

3. The degree of operator skill.

4. Your own established standards.

The tool is inspected before being shipped; however, it

is recommended that the tool be inspected

immediately upon arrival to ensure that the tool has

not been damaged during shipment.

CAUTION

!