Electronic Components Datasheet Search |
|
1--21000--9 Datasheet(PDF) 1 Page - TE Connectivity Ltd |
|
1--21000--9 Datasheet(HTML) 1 Page - TE Connectivity Ltd |
1 / 7 page Instruction Sheet Crimping Dies for TERMINYL* and PLASTI- GRIP* 408--10051 LOC B 1 of 7 E 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved TE logo is a trademark. *Trademark. Other product names, logos, or company names might be trademarks of their respective owners. TOOLING ASSISTANCE CENTER 1--800--722--1111 PRODUCT INFORMATION 1--800--522--6752 This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at www.te.com 23 MAR 11 Rev C Terminals and Splices PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended--use, production operations is available. Typical Crimping Dies Moving Die (Nest) Stationary Die (Anvil) Locator Shank Stationary Die (Anvil) Moving Die (Nest) Locking Flange Latch Arm Yoke Yoke Set Screw Adapter Locator CRIMPING DIE WIRE SIZE (AWG) PART NUMBER COLOR CODE DOT WIRE SIZE (AWG) 1901006--1 Red 8 1901007--1 Blue 6 Figure 1 1. INTRODUCTION Crimping Dies 1901006--1 and 1901007--1 are used with Battery Powered Hand Tool 1901343--1, --2, --3, and --4 (Customer Manual 409--10070) and Battery Powered Hand Tool 2031404--1, --11, --21, --31, and --41 (Customer Manual 409--10103). The dies crimp TERMINYL Terminals and Splices onto wire sizes 8 through 6 AWG, TERMINYL Splices with step--down adapters onto wire sizes 16--14 through 6 AWG, and PLASTI--GRIP Terminals and Splices onto wire sizes 8 through 6 AWG. Refer to Figure 1 to ensure compatibility of crimping die part number, color code dot, and wire size. Dimensions in this document are in millimeters [with inches in brackets]. Figures and Illustrations are for reference only and are not drawn to scale. 2. DESCRIPTION Each crimping die consists of a stationary die (nest) and a moving die (anvil). The stationary die features a locator. Each die contains a color code dot that matches the color code of the terminal and splice. When mated, the dies form a crimping chamber. 3. DIE INSTALLATION AND REMOVAL 3.1. Die Installation 1. Pivot the latch arm away from the yoke to open the crimp head. See Figure 1. 2. Loosen the set screw in the yoke. 3. Insert the shank of the stationary die into the yoke, and tighten the set screw. 4. Extend the ram until the ram set screw is visible. NOTE |
Similar Part No. - 1--21000--9 |
|
Similar Description - 1--21000--9 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |