Electronic Components Datasheet Search |
|
DF63 Datasheet(PDF) 8 Page - Hirose Electric |
|
DF63 Datasheet(HTML) 8 Page - Hirose Electric |
8 / 8 page 8 DF63 Series●15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply BMated dimensions ●Board-to-Wire Connection using the straight pin header BPrecautions for use 1. The connector could be damaged if it is pulled out forcibly. When it is hard to pull out, push it in slightly first and then depress the lock and un-mate. 2. When thick, short sections of wire are used, the connector could be deformed due to the force of the wires’ position. Route cables in such a way that they do twist when being installed. 3. Make sure to turn off the power when mating or un-mating the connector. 4. Please do not touch any area around the contact part with your hand when the power is on; it could be very dangerous. 5. Please contact Hirose representative about the assembly procedure and the instruction manual. BRated values Please avoid using the connectors above the ratings. Also, do not insert or pull out energized or “ live” wires. BOperating environment Please contact us if you are designing this connector into environmental conditions where high and low temperatures are repeated. DF63-*S-3.96C DF63-*P-3.96DSA 8.91 BContact Extraction ■ Contact extraction tool : Flat-bladed screwdriver. 1.2mm blade width or DF-C-PO(B) ■ Intended crimp Contacts : DF63-1618SC(F), DF63-2022SC(F), DF63-1618PC(F), DF63-2022PC(F) ■ Work Method DF63-*P-3.96DS DF63-*S-3.96C (20) DF63-*S-3.96C DF63-*EP-3.96C (11.1) (29.55) ●Socket to Right Angle Header Connection ●Socket to In-line Plug Connection 1.Refer to the drawing No.1. Insert correct size contact extraction tool in the insulator against the molded-in lance. Deflect the lance as shown. 2.Assure that the lance is deflected to release the contact and pull-out wire with the terminated contact. Caution There are parts on the crimp contact that can cause injuries,please use cautionwhenunmating the contacts. 1 2 Contact extraction tool Housing Cross Sectional Diagram The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 11/2015. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ® |
Similar Part No. - DF63 |
|
Similar Description - DF63 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |