Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

68233-1 Datasheet(PDF) 16 Page - Tyco Electronics

Part No. 68233-1
Description  Pneumatic Tools
Download  17 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  MACOM [Tyco Electronics]
Homepage  http://www.macom.com
Logo 

68233-1 Datasheet(HTML) 16 Page - Tyco Electronics

 
Zoom Inzoom in Zoom Outzoom out
 16 / 17 page
background image
409-2426
Pneumatic Tools 68068 and 68068-1
Rev A
16 of 17
Tyco Electronics Corporation
19. Align the holes of the rear plug with the holes of the cylinder housing, and insert the rear plug. Install
the screws (Item 20), and tighten.
20. Re–install the strap (Item 7) using the two screws (Item 9) and washers (Item 8).
8.3. Air Valve Spool O" Ring Replacement
1. DISCONNECT the tool from the air supply.
To prevent personal injury, ALWAYS DISCONNECT the tool from the air supply when making replacements.
2. Remove the handle grip (Item 1).
3. Remove the dowel pin (Item 14) from the valve housing.
4. Slide the button (Item 2) and attached air valve spool (Item 4) out of the valve housing.
5. Remove the compression spring (Item 5) from inside of the valve housing, and inspect it for excessive
wear or breakage. If necessary, replace the compression spring.
DO NOT disturb the air valve spool adjustment within the button. If the spool adjustment is disturbed, refer to
Paragraph 8.4 to re-adjust it.
6. Replace both air valve spool “O” rings (Item 3), then apply “O” ring lubricant to the new “O” rings.
7. Re–install the compression spring (Item 5).
8. Slide the air valve spool and button into the valve housing until the slot of the button is aligned with
the dowel pin hole of the valve housing. See Figure 10.
9. Insert the dowel pin (Item 14) all of the way into the valve housing. The ends of the dowel pin must be
flush with the sides of the valve housing.
10. Re–install the handle grip.
Figure 10
Air Valve Spool O" Ring Replacement
Tip of ScrewDriver in
Slot at Rear of Spool
Slot of Button Aligned with
Dowel Pin Hole of Valve Housing
Air Valve Spool Adjustment
DANGER
NOTE
i


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn