Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

68233-1 Datasheet(PDF) 7 Page - Tyco Electronics

Part No. 68233-1
Description  Pneumatic Tools
Download  17 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  MACOM [Tyco Electronics]
Homepage  http://www.macom.com
Logo 

68233-1 Datasheet(HTML) 7 Page - Tyco Electronics

Zoom Inzoom in Zoom Outzoom out
 7 / 17 page
background image
409-2426
Pneumatic Tools 68068 and 68068-1
Rev A
7 of 17
Tyco Electronics Corporation
WIRE RANGE
JAW ASSEMBLY
TERMINAL OR SPLICE
SIZE
(AWG)
CMA
PART
NUMBER
INSTRUCTION
SHEET
12-10
5,180-13,100
68101 0
COMPALUM* Insulation Piercing
8
13,100-20,800
68101-0
408 23930
g
Terminal and Splice
8
13,100-20,800
68192-1
408-23930
6
20,800-33,100
68102-0
COMPALUM Bar Crimp Terminal and Splice
6
20,800-33,100
68106-0
408-2394
SOLISTRAND* Terminal and Splice
8
13,100-20,800
68135-0
408 2395
SOLISTRAND* Terminal andSplice
6
20,800-33,100
68136-0
408-2395
PLASTI GRIP* Terminal
6
20,800-33,100
68233-1
408 2532
PLASTI-GRIP* Terminal
4
33,100-52,600
68254-1
408-2532
Pre-Insulated Vinyl (ECV) Closed End Splice
12-6
19,500-42,700
68268-1
408-2564
Figure 5
3. Inspect the jaw closure surfaces, jaw bottoming surfaces, and jaw cam rollers for deposits of dirt or
other foreign particles. If necessary, wipe clean with a clean cloth. Re–lubricate the jaw cam rollers
according to Paragraph 5.3. Make sure the jaw cam rollers are not binding.
4. Pull one cowling pin and remove the retaining pin from the lower housing cover. The cover will swing
open. See Figure 6.
5. Remove the pivot pins.
6. Orient the jaws as described in the instruction sheet packaged with the jaw assembly (refer to Figure
5). Position the jaws in the tool housing ensuring that the jaw cam rollers are properly mated with the
tool cam and the pivot pin holes of the jaws and the tool housing are aligned. See Figure 6.
7. Insert the pivot pins.
To avoid damage to the tool or pivot pins, make sure that the pivot pins are fully inserted.
8. Pivot the lower housing cover into the closed position, and re–install the retaining pin and cowling pin.
3.2. Removing Jaw Assembly
1. DISCONNECT the tool from the air supply.
To prevent personal injury, ALWAYS DISCONNECT the tool from the air supply when removing the jaw assembly.
2. Pull one cowling pin and remove the retaining pin from the lower housing cover. The cover will swing
open.
3. Remove the pivot pins, then remove the jaws.
CAUTION
!
DANGER


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn