■Precautions

1. Tightening torque for the terminal screw.

 ：58.8N・cm max.

2. Lead Wire

（1）Terminal portion for the motor load and power source.

  （1↑・2↑・M1 ・M2）

  ： AWG18（Dia of covered wire = 3 mm max.）

（2）Terminal portion for the capacitor.（C1 ・C2）

  ： AWG20∼24（Dia of covered wire = 2 mm max.）

（3）Wire stripping

  ： 8∼8.5 mm

■Customizations

・Customization of colors, shapes, etc. of the trigger, knob, lever, etc.

are available.