Datasheet

Document Number: 001-89638 Rev. *E

Page 2 of 34

More Information

Cypress provides a wealth of data at www.cypress.com to help you to select the right PSoC device for your design, and to help you

to quickly and effectively integrate the device into your design. For a comprehensive list of resources, see the knowledge base article

KBA86521, How to Design with PSoC 3, PSoC 4, and PSoC 5LP. Following is an abbreviated list for PSoC 4:

In addition, PSoC Creator includes a device selection tool.

application notes covering a broad range of topics, from basic

to advanced level. Recommended application notes for getting

started with PSoC 4 are:

❐ AN79953: Getting Started With PSoC 4

❐ AN88619: PSoC 4 Hardware Design Considerations

❐ AN86439: Using PSoC 4 GPIO Pins

❐ AN57821: Mixed Signal Circuit Board Layout

❐ AN81623: Digital Design Best Practices

❐ AN73854: Introduction To Bootloaders

❐ AN89610: ARM Cortex Code Optimization

❐ Architecture TRM details each PSoC 4 functional block.

❐ Registers TRM describes each of the PSoC 4 registers.

inexpensive development platform with debugging capability.

This kit includes connectors for Arduino™ compatible shields

programming and debug.

PSoC Creator

PSoC Creator is a free Windows-based Integrated Design Environment (IDE). It enables concurrent hardware and firmware design

of PSoC 3, PSoC 4, and PSoC 5LP based systems. Create designs using classic, familiar schematic capture supported by over 100

pre-verified, production-ready PSoC Components; see the list of component datasheets. With PSoC Creator, you can:

1. Drag and drop component icons to build your hardware

system design in the main design workspace

2. Codesign your application firmware with the PSoC hardware,

using the PSoC Creator IDE C compiler

3. Configure components using the configuration tools

4. Explore the library of 100+ components

5. Review component datasheets

Figure 1. CapSense Example Project in PSoC Creator

1

2

4

5

5

3