 Semiconductor Components Industries, LLC, 2013

June, 2013 − Rev. 23

1

Publication Order Number:

CAT5114/D

CAT5114

32‐tap Digital

Potentiometer (POT)

Description

The CAT5114 is a single digital POT designed as an electronic

replacement for mechanical potentiometers and trim pots. Ideal for

automated adjustments on high volume production lines, they are also

well suited for applications where equipment requiring periodic

adjustment is either difficult to access or located in a hazardous or

remote environment.

The CAT5114 contains a 32-tap series resistor array connected

that are controlled by three input pins, determines which tap is

memory, is not lost when the device is powered down and is

automatically reinstated when power is returned. The wiper can be

adjusted to test new system values without affecting the stored setting.

Wiper-control of the CAT5114 is accomplished with three input

control pins, CS, U/D, and INC. The INC input increments the wiper

in the direction which is determined by the logic state of the U/D input.

The CS input is used to select the device and also store the wiper

position prior to power down.

The digital POT can be used as a three-terminal resistive divider or

as a two-terminal variable resistor. Digital POTs bring variability and

programmability to a wide variety of applications including control,

parameter adjustments, and signal processing.

Features

2  3 mm TDFN Packages

Compliant

Applications

http://onsemi.com

PIN CONFIGURATIONS

U/D

INC

CS

1

See detailed ordering and shipping information in the package

dimensions section on page 9 of this data sheet.

ORDERING INFORMATION

SOIC−8

V SUFFIX

CASE 751BD

MSOP−8

Z SUFFIX

CASE 846AD

GND

PDIP (L), SOIC (V), MSOP (Z)

PDIP−8

L SUFFIX

CASE 646AA

TSSOP−8

Y SUFFIX

CASE 948AL

TSSOP (Y)

(Top Views)

GND

U/D

INC

CS

1

TDFN−8

VP2 SUFFIX

CASE 511AK

TDFN (VP2)

GND

U/D

INC

CS

1