08 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet

Specifications/Characteristics

Clock and data input source

Analog channels 1, 2, 3, or 4

Digital channels D0 to D15 (3000, 4000 and 6000 X-Series only)

Max clock/data rate

Up to 3.4 Mbps

Triggering

Start condition

Stop condition

Missing acknowledge

Address with no acknowledge

Restart

EEPROM data read

Frame (Start:Addr7:Read:Ack:Data)

Frame (Start:Addr7:Write:Ack:Data)

Frame (Start:Addr7:Read:Ack:Data:Ack:Data2)

Frame (Start:Addr7:Write:Ack:Data:Ack:Data2)

10-bit write

Hardware-based decode

Data (HEX digits in white)

Address decode size: 7 bits (excludes R/W bit) or 8 bits (includes R/W bit)

Read address (HEX digits followed by “R” in yellow)

Write address (HEX digits followed by “W” in light-blue)

Restart addresses (“S” in green, followed by HEX digits, followed by “R” or “W”)

Acknowledges (suffixes “A” or “~A” in the same color as the data or address preceding it)

Idle bus (mid-level bus trace in dark blue)

Active bus (bi-level bus trace in dark blue)

Unknown/error bus (bi-level bus trace in red)

Multi-bus analysis