FEATURES

Metalized Polypropylene

APPLICATIONS

Operating Temperature Range

-40°C to +110°C

Capacitance Tolerance

+10% at 1 kHz, 20°C

AC voltage

(50/60 Hz)

UL/CSA

VDE

CQC

250/275/310

250/275/310

310

Dissipation Factor

at 1 kHz and 20°C

Tan δ

.1% Max

Insulation Resistance

@20°C (<70% RH)for 1 minute

at 100VDC applied

Capacitance

Terminal to Terminal

Terminal to Case

<0.33uF

15000 MΩ

>30000 MΩ at 100VDC

>5000 MΩ at 500VDC

>0.33uF

5000 MΩxuF

>30000 MΩ at 100VDC

>5000 MΩ at 500VDC

Self Inductance

<1 nano-Henry per mm of lead spacing and lead length

Dielectric Strength

Terminal to Terminal

C<.0068uF, 1500 VAC or 2121 VDC applied for 60 seconds

C>.0068uF, 1768VDC or 1000 VAC applied for 60 seconds

Cut-off current: 2A ac or 10mAdc

Current limiting resistance: 1Ω/V

Terminal to case

2050VAC (50/60 Hz) applied between the terminals and case for 60

seconds and 20°C

Life Expectancy

1000 hours at 110°C at 125% of rated voltage with once every hour the voltage is

increased to 1000 VAC for 0.1 seconds

Capacitance change

<10% of initially measured value

Dissipation Factor

<1.0% at 1kHz

Insulation Resistance

>100% of initially specified value (T-T)

>3000 MΩ (Terminal to case)

Humidity test

500 Hours at 90 to 95% RH, 40C and no voltage applied after which the following

voltage will be applied for 1 minute to each capacitor.

C<0.0068uF 1500VAC, C>0.0068uF 1000VAC

Capacitance change

<10% of initially measured value

Dissipation Factor

<1.0% at 1kHz

Insulation Resistance

>50% of initially specified value (T-T)

>15000 MΩ (Terminal to Case)

Impulse voltage

(24 pulses)

C< 1uF Vp=2.5kVDC

C> 1uF Vp=2.5kV √C

Capacitance temperature

coefficient

-200ppm/°C, +100ppm/°C

Construction

Metallized Polypropylene film

Electrodes

Vacuum deposited Metal layers

Coating

Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0)

Lead terminations

tinned copper clad steel leads