© Semiconductor Components Industries, LLC, 2016

August, 2016 − Rev. 4

1

Publication Order Number:

NCS2008/D

NCS20081, NCV20081,

NCS20082, NCV20082,

NCS20084, NCV20084

Operational Amplifier,

Rail-to-Rail Input and

Output, 1.2 MHz

The NCS2008 series operational amplifiers provide rail−to−rail

input and output operation, 1.2 MHz bandwidth, and are available in

single, dual, and quad configurations. Rail−to−rail operation gives

designers use of the entire supply voltage range while taking

advantage of the 1.2 MHz bandwidth. The NCS2008 can operate on

supply voltages from 1.8 to 5.5 V over a temperature range from

−40

°C to 125°C. At a 1.8 V supply, this device has a slew rate of 0.4

V/

ms while consuming only 42 mA of quiescent current per channel.

Since this is a CMOS device, high input impedance and low bias

currents make it ideal for interfacing to a wide variety of signal

sensors. The NCS2008 devices are available in a variety of compact

packages.

Features

Unique Site and Control Change Requirements; AEC−Q100

Qualified and PPAP Capable

Compliant

Applications

This document contains information on some products that are still under development.

ON Semiconductor reserves the right to change or discontinue these products without

notice.

www.onsemi.com

ORDERING INFORMATION

See detailed ordering and shipping information on page 3 of

this data sheet.

1

14

SOIC−14

CASE 751A

SC70−5

CASE 419A

1

5

TSOP−5/SOT23−5

CASE 483

Micro8

]/MSOP8

CASE 846A

1

8

SOIC−8

CASE 751

TSSOP−8

CASE 948S

TSSOP−14

CASE 948G

See general marking information in the device marking

section on page 2 of this data sheet.

DEVICE MARKING INFORMATION

UDFN6

CASE 517AP

1

6

1

14