L-1

REV.: 0/2016

www.recom-power.com

12 Watt

Constant

Current Single

Output

AC/DC Converter

Features

LED

Driver

• Low Profile Case (13mm height max.)

• 350mA to 700mA Constant Current Outputs

• Terminal Block Input/Output with Cable Clamps

• Fully Protected (OLP, SCP, OCP, OTP)

• low Standby Power, ErP conform

• low cost

RACD12-LP

Description

These low profile constant current LED drivers have been designed for cost-sensitive applications.

The SELV outputs are suitable for both independently supplied or built-in power-supply LED luminaires.

Their low profile design allows them to be invisibly built into furniture, discreetly mounted under shelves

or integrated in space-restricted applications such as coving lighting, strip lighting or troffer lighting sys-

tems. The power supplies are short circuit and overload protected and come with a full 3-year warranty.

Selection Guide

Part

nom. Input

Input

Output

Output

Efficiency

Output

Number

Voltage

Current

Voltage Range

Current

typ.

Power max.

[VAC]

[mA]

[VDC]

[mA]

[%]

[W]

RACD12-350-LP

230

130

2-37

350

86

13W

RACD12-500-LP

230

130

2-24

500

81

12W

RACD12-700-LP

230

130

2-19

700

85

13W

3 YEAR

warranty

3

BASIC CHARACTERISTICS

Parameter

Condition

Min.

Typ.

Max.

Input Voltage Range

198VAC

230VAC

264VAC

Inrush Current

8.0A

Start-up Time

500ms

Input Frequency Range

47Hz

63Hz

No Load Power Consumption

0.5W

Power Factor

full load, 230VAC

0.55

Internal Operating Frequency

full load

60kHz

140kHz

50mAp-p

All LED Drivers may not be used without a load. They must be switched on the primary side only.

Noncompliance may damage the LED or reduce its lifetime.

REGULATIONS

Parameter

Condition

Value

Output Current Accuracy

±5% max.

Line Regulation

5% max.

Load Regulation

5% max.

Notes:

Note1: Measured at 20MHz BW using 0.1µF & 47µF parallel capacitor.

ERP

compliant

IEC/EN61347-1 Certified

IEC/EN61347-2-13 Certified

ENEC Certified

CB Report

EN55015 Compliant