Electrical Characteristics(Note 2) (Continued)

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

intended to be functional, but specific performance is not guaranteed. For guaranteed specifications, see the Electrical Characteristics tables.

Note 2: Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of

Note 4: Human body model: 1.5k

Ω in series with 100pF. Machine model: 0Ω in series with 200pF.

Note 5: Slew Rate is the average of the rising and falling rates.

Note 6: Typical values represent the most likely parametric norm. Bold numbers refer to over temperature limits.

Note 7: Positive current correspondes to current flowing in the device.

Note 8: Drift determined by dividing the change in parameter distribution at temperature extremes by the total temperature change.

Note 9: CMRR definition: [|

Note 10: +PSRR definition: [|

offset shift subtracted out.

Note 11: Gain Control Frequency Response Schematic:

20073932

Note 13: Flat Band Attenuation (Relative To Max Gain) Range Definition: Specified as the attenuation range from maximum which allows gain flatness specified

10V/V down to 1V/V=20dB range

10V/V down to 4.7V/V=6.5dB range

Connection Diagram

14-Pin SOIC/TSSOP

20073946

Top View

Ordering Information

Package

Part Number

Package Marking

Transport Media

NSC Drawing

14-pin SOIC

LMH6503MA

LMH6503MA

55 Units/Rail

M14A

LMH6503MAX

2.5k Units Tape and Reel

14-Pin TSSOP

LMH6503MT

LMH6503MT

94 Units/Rail

MTC14

LMH6503MTX

2.5k Units Tape and Reel

www.national.com

4