Electronic Components Datasheet Search |
|
LPS4018-183MR Datasheet(PDF) 1 Page - Coilcraft lnc. |
|
LPS4018-183MR Datasheet(HTML) 1 Page - Coilcraft lnc. |
1 / 2 page Shielded Power Inductors–LPS4018 Document 435-1 Document 435-1 Revised 09/02/15 Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 54 – 100 mg Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 ″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 1. Please specify termination and packaging codes: LPS4018-223MRC Termination: R= RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C= 7 ″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13 ″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at 25°C that causes the specified induc- tance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Compo- nents” before soldering. DCR SRF Isat (A)5 Irms (A)6 Inductance2 max3 typ4 10% 20% 30% 20°C 40°C Part number1 (µH) (Ohms) (MHz) drop drop drop rise rise LPS4018-561MR_ 0.56 ±20% 0.033 250 4.8 5.2 5.3 1.9 2.8 LPS4018-102NR_ 1.0 ±30% 0.042 180 3.8 3.9 4.0 1.8 2.5 LPS4018-222MR_ 2.2 ±20% 0.070 90 2.7 2.8 2.9 1.5 2.0 LPS4018-332MR_ 3.3 ±20% 0.080 75 1.9 2.0 2.0 1.4 1.9 LPS4018-472MR_ 4.7 ±20% 0.125 65 1.8 1.9 1.9 1.3 1.8 LPS4018-682MR_ 6.8 ±20% 0.150 50 1.2 1.3 1.3 1.0 1.5 LPS4018-103MR_ 10 ±20% 0.200 40 1.1 1.2 1.3 0.90 1.25 LPS4018-153MR_ 15 ±20% 0.260 32 0.86 0.91 0.94 0.80 1.12 LPS4018-183MR_ 18 ±20% 0.270 27 0.78 0.83 0.85 0.70 1.00 LPS4018-223MR_ 22 ±20% 0.360 26 0.74 0.80 0.83 0.65 0.90 LPS4018-333MR_ 33 ±20% 0.420 20 0.58 0.64 0.68 0.55 0.80 LPS4018-473MR_ 47 ±20% 0.650 16 0.51 0.55 0.56 0.45 0.68 LPS4018-683MR_ 68 ±20% 0.950 13 0.41 0.45 0.46 0.40 0.56 LPS4018-104MR_ 100 ±20% 1.40 10 0.34 0.36 0.37 0.35 0.50 LPS4018-124MR_ 120 ±20% 1.60 9.0 0.31 0.33 0.34 0.30 0.45 LPS4018-154MR_ 150 ±20% 2.00 8.0 0.27 0.29 0.30 0.28 0.40 LPS4018-184MR_ 180 ±20% 2.50 7.5 0.24 0.26 0.27 0.26 0.36 LPS4018-224MR_ 220 ±20% 3.70 6.5 0.21 0.225 0.235 0.20 0.30 LPS4018-334MR_ 330 ±20% 5.90 5.5 0.18 0.19 0.20 0.17 0.23 LPS4018-474MR_ 470 ±20% 7.80 4.5 0.14 0.16 0.17 0.15 0.20 LPS4018-564MR_ 560 ±20% 10.0 4.0 0.13 0.14 0.15 0.14 0.18 LPS4018-684MR_ 680 ±20% 11.5 3.5 0.12 0.13 0.14 0.12 0.16 LPS4018-824MR_ 820 ±20% 14.0 2.9 0.11 0.12 0.13 0.10 0.14 LPS4018-105MR_ 1000 ±20% 18.0 2.8 0.10 0.11 0.11 0.098 0.125 • Very low DCR; excellent current handling • 4.0 × 4.0 mm footprint; less than 1.8 mm tall Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each) from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to 33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit http://order.coilcraft.com. |
Similar Part No. - LPS4018-183MR |
|
Similar Description - LPS4018-183MR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |