Electronic Components Datasheet Search |
|
CC1150RGVR Datasheet(PDF) 8 Page - Texas Instruments |
|
|
CC1150RGVR Datasheet(HTML) 8 Page - Texas Instruments |
8 / 67 page CC1150 SWRS037B – JANUARY 2006 – REVISED MARCH 2015 www.ti.com RF Transmit (continued) Tc = 25°C, VDD = 3.0 V, if nothing else stated. All measurement results are obtained using the CC1150EM reference design (see [1] and [2]). PARAMETER TYP MAX UNIT CONDITION 25 MHz to 1 GHz –36 dBm Spurious 47 to 74 MHz, emissions and 87.5 to 118 MHz, –54 dBm harmonics(1), 174 to 230 MHz, 433/868 MHz 470 to 862 MHz Otherwise above 1 GHz –30 dBm < 200 µV/m at 3 m below dBm –49.2 960 MHz EIRP Spurious emissions, 315/915 MHz < 500 µV/m at 3 m above dBm –41.2 960 MHz EIRP Whe output power is maximum 2nd, 3rd and 4th harmonic –20 dBc 6 mV/m at 3 m (–19.6 dBm EIRP) Harmonics 315 MHz 5th harmonic –41.2 dBm 2nd harmonic –20 dBc With +10 dBm output power Harmonics 915 MHz 3rd, 4th, and 5th harmonic –41.2 dBm Serial operation. Time from sampling the TX latency 8 Bits data on the transmitter data input pin until it is observed on the RF output ports. (1) Note that close-in spurs vary with centre frequency and limits the frequencies and output power level which the CC1150 can operate at without violating regulatory restrictions. See also Section 6.2.5 for information regarding additional filtering. 4.7 Crystal Oscillator Tc = 25°C, VDD = 3.0 V if nothing else is stated. All measurement results obtained using the CC1150EM reference design (see [1] and [2]). PARAMETER MIN TYP MAX UNIT CONDITION Crystal frequency 26 26 27 MHz This is the total tolerance including a) initial tolerance, b) aging and c) temperature dependence. Tolerance ±40 ppm The acceptable crystal tolerance depends on RF frequency and channel spacing / bandwidth Load capacitance 10 13 20 pF Simulated over operating conditions ESR 100 Ω Measured on the CC1150EM reference Start-up time 150 µs design (see [1] and [2]). This parameter is to a large degree crystal dependent. 4.8 Frequency Synthesizer Characteristics Tc = 25°C, VDD = 3.0 V if nothing else is stated. All measurement results obtained using the CC1150EM reference design (see [1] and [2]). PARAMETER MIN TYP MAX UNIT CONDITION Programmed frequency 26 MHz to 27 MHz crystals. The resolution 397 FXOSC / 2 16 412 Hz resolution (in Hz) is equal for all frequency bands. Given by crystal used. Required accuracy (including temperature and aging) depends Synthesizer frequency tolerance ±40 ppm on frequency band and channel bandwidth / spacing. @ 50 kHz offset from carrier, RF carrier phase noise –82 dBc/Hz carrier at 868 MHz @ 100 kHz offset from carrier, RF carrier phase noise –86 dBc/Hz carrier at 868 MHz 8 Specifications Copyright © 2006–2015, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: CC1150 |
Similar Part No. - CC1150RGVR |
|
Similar Description - CC1150RGVR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |