RACD100-PSE

LIGHTLINE

AC/DC-Converter

with 5 year Warranty

100 Watt

Single

Output

Selection Guide

Input Voltage Range

90-130 VAC or 127-184VDC

Input Frequency Range

47-63Hz.

Power Factor

Full Load, 115VAC

>0.98

THD

Full Load, 115VAC

8% max.

AC Current

115VAC

1.4A max.

Input/Output Isolation

3.75kVAC / 1minute

Input/Case Isolation

1.8kVAC / 1minute

Output/Case Isolation

0.5kVAC / 1minute

Leakage Current

<0.75mA

Voltage Tolerance

-1% to 5%

Start-up Time

Full Load, 115VAC

1.5s

Ripple & Noise (at 20MHz bandwith)

150mVp-p max.

Over Current Protection

95%-105% rated current

Auto-Recovery

Short Circuit Protection

Hiccup Mode

Over Voltage Protection

12V

15V typ.

Latch Mode

24V

31V typ.

(Power off to recover)

36V

45V typ.

48V

58V typ.

Over Temperature Protection

Tcase 95°C ±10°C

Operating Temperature Range

without derating

-20°C to +50°C( see graph)

(free air convection, according to PSE)

Case Temperature

75°C max.

Operation Humidity

20%-90% RH Non-Condensing

Storage Temperature

-40°C to +80°C

Storage Humidity

10%-90% RH

Vibration

10-500Hz, 2G, 60 Min. along X, Y and Z

IP Rating

IP67

EMC Compatibility

EN55015

FCC, Part 15

Harmonic Current

EN61000-3-3

EMC Immunity

EN61000-4-2, 3, 4, 5, 6, 11

continued on next Page

Specifications

Features

LED DRIVER

Part

CV Mode

CC Mode

Efficiency

Number

Constant Voltage Current Range DC Voltage Range Constant Current (115VAC)

(V)

(A)

(V)

(A)

(%)

RACD100-12-PSE

12

0-8.3

9-12

8.3

87

RACD100-24-PSE

24

0-4.2

14-24

4.2

87

RACD100-36-PSE

36

0-2.8

26-36

2.8

89

RACD100-48-PSE

48

0-2.1

34-48

2.1

88

Note:

All LED Drivers may not be used without a load.

They must be switched on the primary side

only. Noncompliance may damage the LED or

reduce its lifetime.

Refer to Application Notes

RoHS

2011/65/EU

6/6

Description

The RACD100-PSE LED driver series offers 100W of power with a universal input voltage range of 90-130VAC and

constant current output up to 8.3A at a voltage of approximately 12V. The series features a unique dual mode

operation for either constant current or constant voltage making it suitable for driving LEDs directly or via local con-

stant-current DC/DC modules directly on the light engine board. The RACD100-PSE series are fully sealed IP67 LED

drivers and therefore ideally suited for indoor and outdoor applications including road, street and walkway lighting,

high-bay, LED signage, and outdoor area lighting for car parks, public buildings, and tunnels. The LED drivers are

PSE certified and come with a 5 year warranty.

L-60

www.recom-power.com

REV: 0/2015