Electronic Components Datasheet Search |
|
PEEP Datasheet(PDF) 2 Page - MERITEK ELECTRONICS CORPORATION |
|
PEEP Datasheet(HTML) 2 Page - MERITEK ELECTRONICS CORPORATION |
2 / 8 page Rev. 7 Conductive Polymer Aluminum Solid Capacitor (Radial Type) MERITEK PEEP Series STANDARD RATINGS (CONTINUED) WV/VDC (SV) Cap. ( μF) Size Code Leakage Current (μA) ESR (mΩ/20 ⁰C,100K~300KHz) Rated Ripple Current (mA/105 ⁰C,100KHz) 6.8 (7.8) 270 0508 367 12 3500 390 0509 530 11 3800 1000 0611 1360 8 5500 7.5 (8.6) 270 0508 405 12 3500 390 0509 585 11 3800 500 0509 750 12 3500 10 (11.5) 820 0812 1640 8 6100 1000 0812 2000 8 6100 6.3 (7.2) 100 0606 320 24 2490 270 0609 864 15 3800 270 0809 864 10 5000 330 0809 1056 10 5000 470 0809 1505 16 4000 470 0812 1505 10 5230 560 0812 1792 14 4950 680 1012 2176 10 6100 820 1012 2624 10 6100 1000 1012 3200 12 5400 20 (23) 390 0811 1560 14 4970 470 0812 1880 14 4970 25 (28.7) 220 0812 1100 16 4650 25 (28.7) 22 0606 154 35 2400 100 0812 700 25 2890 RELIABILITY Item Standard Leakage Current DC rated voltage shall be applied between anode and cathode lead wire terminations of a capacitor through 1k protective resistance, and the leakage current shall be less than or equal to the value listed in table 5 after 2 minutes with the voltage reaching the rated value at 20±2 ⁰C. tanφ 0.1 MAX. measured at 120Hz ±10% at 20±2 ⁰C. ESR Compensation Signal Level Frequency Measurement Point Short and Open compensation would be required. Short correction is performed using the shorting plate made of 0.5 thickness copper plate with gold coating. 500mV 100KHz Point of lead wire within 1mm from the body Impedance at High and Low Temperature Impedance at 100kHz at -55±3 ⁰C or -25±3⁰C shall meet the values listed in the table below. Impedance Ratio Performance Z (-55 ⁰C)/Z(+20⁰C) ≤1.25 Z (-105 ⁰C)/Z(+20⁰C) ≤1.25 Pull Strength of Lead Wire Terminations With the body of a capacitor fixed, the load listed in the table below shall be applied to the lead wire termination in its draw out direction, gradually up to the specified value and held for 10±1 seconds. After this test, that capacitor shall not appear any change defective in use. Case diameter (mm) Load Strength (N) Load Strength (kgf) Ø6.3 5 0.51 Ø8 10 1.0 Ø10 10 1.0 |
Similar Part No. - PEEP |
|
Similar Description - PEEP |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |