Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.COM

X  

TMC4210 Datasheet(PDF) 30 Page - TRINAMIC Motion Control GmbH & Co. KG.

Part # TMC4210
Description  MOTION CONTROLLER FOR STEPPER MOTORS
Download  48 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  TRINAMIC [TRINAMIC Motion Control GmbH & Co. KG.]
Direct Link  http://www.trinamic.com
Logo TRINAMIC - TRINAMIC Motion Control GmbH & Co. KG.

TMC4210 Datasheet(HTML) 30 Page - TRINAMIC Motion Control GmbH & Co. KG.

Back Button TMC4210 Datasheet HTML 26Page - TRINAMIC Motion Control GmbH & Co. KG. TMC4210 Datasheet HTML 27Page - TRINAMIC Motion Control GmbH & Co. KG. TMC4210 Datasheet HTML 28Page - TRINAMIC Motion Control GmbH & Co. KG. TMC4210 Datasheet HTML 29Page - TRINAMIC Motion Control GmbH & Co. KG. TMC4210 Datasheet HTML 30Page - TRINAMIC Motion Control GmbH & Co. KG. TMC4210 Datasheet HTML 31Page - TRINAMIC Motion Control GmbH & Co. KG. TMC4210 Datasheet HTML 32Page - TRINAMIC Motion Control GmbH & Co. KG. TMC4210 Datasheet HTML 33Page - TRINAMIC Motion Control GmbH & Co. KG. TMC4210 Datasheet HTML 34Page - TRINAMIC Motion Control GmbH & Co. KG. Next Button
Zoom Inzoom in Zoom Outzoom out
 30 / 48 page
background image
TMC4210 DATASHEET (Rev. 1.03 / 2015-JUN-03)
30
www.trinamic.com
6.1.11 INTERRUPT_MASK & INTERRUPT_FLAGS (IDX=%1011)
The TMC4210 provides one interrupt register of eight flags for the stepper motor.
Interrupt bits are named int_<mnemonic>. The interrupt out nINT_SDO_C is set active low and the
interrupt status bit int is set active high if at least one interrupt flag of the motor becomes set. If the
interrupt status is inactive, nINT is high (1) and int is low (0).
SETTING MASKS AND FLAGS
-
An interrupt flag is set to 1 if its assigned interrupt condition occurs.
-
Each interrupt bit can either be enabled or disabled (1/0) individually by an associated interrupt
mask bit named mask_<mnemonic>.
-
Interrupt flags are reset to 0 by a write access (RW=0) to their interrupt register address
(IDX=%1011). Write 1 at the position of the bit to clear the flag. Writing a 0 to the corresponding
position leaves the interrupt flag untouched.
-
Interrupt flags are forced to 0 if the corresponding mask bit is disabled (0).
INTERRUPT FLAGS
int_<mnemonic>
Function
int_pos_end
If a target position is reached while the interrupt mask mask_pos_end is 1,
the bit is set to 1.
int_ref_wrong
Reference switch signal was active outside the reference switch tolerance
range (defined by the DX_REF_TOLERANCE register).
The switches processed via the inputs REF_L and REF_R can be used as stop
switches for automatic motion limiting, as reference switches, and for both. If
a reference switch becomes active out of the reference switch tolerance range
the interrupt flag int_ref_wrong is set if the interrupt mask bit
mask_ref_wrong is set.
int_ref_miss
The interrupt flag int_ref_miss is set if the reference switch is inactive at the 0
position and the mask mask_ref_miss is enabled.
int_stop
The int_stop flag is set, if the reference switch has forced a stop during
motion and if the interrupt mask mask_stop is set.
int_stop_left_low
High to low transition of left reference switch. The int_stop_left_low flag is
set if the reference switch changes from high to low and if the interrupt mask
bit mask_stop_left_low is set.
int_stop_right_low
High to low transition of right reference switch. The int_stop_right_low flag is
set if the reference switch changes from high to low and if the interrupt mask
bit mask_stop_right_low is set.
int_stop_left_high
Low to high transition of left reference switch. The int_stop_left_high flag
indicates that the left reference switch input changes from low to high if the
mask bit mask_stop_left_high is set.
int_stop_right_high
Low to high transition of right reference switch. The int_stop_right_high flag
indicates that the right reference switch input changes from low to high if
the mask bit mask_stop_right_high is set.
INTERRUPT MASK BIT
mask_<mnemonic>
Function
mask_pos_end
1: mask enabled; 0: mask disabled.
mask_ref_wrong
1: mask enabled; 0: mask disabled.
mask_ref_miss
1: mask enabled; 0: mask disabled.
mask_stop
1: mask enabled; 0: mask disabled.
mask_stop_left_low
1: mask enabled; 0: mask disabled.
mask_stop_right_low
1: mask enabled; 0: mask disabled.
mask_stop_left_high
1: mask enabled; 0: mask disabled.
mask_stop_right_high
1: mask enabled; 0: mask disabled.


Similar Part No. - TMC4210

ManufacturerPart #DatasheetDescription
logo
TRINAMIC Motion Control...
TMC423 TRINAMIC-TMC423 Datasheet
290Kb / 1P
   Triple Incremental Encoder Interface and Companion IC for the TMC428
TMC423 TRINAMIC-TMC423 Datasheet
226Kb / 22P
   Serial Triple Incremental Encoder Interface
TMC423 TRINAMIC-TMC423_1 Datasheet
226Kb / 22P
   Serial Triple Incremental Encoder Interface
TMC424 TRINAMIC-TMC424 Datasheet
446Kb / 21P
   Serial Triple Incremental Encoder Interface
logo
List of Unclassifed Man...
TMC428 ETC-TMC428 Datasheet
378Kb / 50P
   Intelligent Triple Stepper Motor Controller with Serial Peripheral Interfaces
More results

Similar Description - TMC4210

ManufacturerPart #DatasheetDescription
logo
Nippon Pulse America, I...
PCD46X1A NPM-PCD46X1A Datasheet
657Kb / 2P
   Economical Motion Controllers for Stepper Motors
logo
TRINAMIC Motion Control...
TMC453 TRINAMIC-TMC453 Datasheet
143Kb / 1P
   High End Motion Controller with Encoder Interface for Stepper Motors
TMCM-1311 TRINAMIC-TMCM-1311 Datasheet
772Kb / 24P
   MODULE FOR STEPPER MOTORS
TMCM-1630 TRINAMIC-TMCM-1630 Datasheet
524Kb / 18P
   MODULE FOR STEPPER MOTORS
TMCM-1160 TRINAMIC-TMCM-1160 Datasheet
977Kb / 26P
   MODULE FOR STEPPER MOTORS
TMCM-6210 TRINAMIC-TMCM-6210 Datasheet
1Mb / 44P
   Module for Stepper Motors
TMCM-343 TRINAMIC-TMCM-343_11 Datasheet
769Kb / 27P
   MODULES FOR STEPPER MOTORS
TMCM-351 TRINAMIC-TMCM-351_12 Datasheet
991Kb / 28P
   MODULES FOR STEPPER MOTORS
TMCM-3110 TRINAMIC-TMCM-3110 Datasheet
955Kb / 32P
   MODULES FOR STEPPER MOTORS
TMCM-1110 TRINAMIC-TMCM-1110 Datasheet
870Kb / 18P
   MODULE FOR STEPPER MOTORS
More results


Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48


Datasheet Download

Go To PDF Page


Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com