PN8728 datasheet(2/8 Pages) MALLORY

Part #	PN8728

Description	Soft Touch Rev Control

Download	8 Pages

Scroll/Zoom	100%

Manufacturer	MALLORY [Mallory performance club]

Direct Link	http://mallory-ignition.com/

Logo

2 / 8 page

2

INSTALLATION INSTRUCTIONS

MSD • WWW.MSDPERFORMANCE.COM • (915) 857-5200 • F AX (915) 857-3344

WIRING

WARNING: High voltage is present on the coil terminals. Do Not touch the coil terminals or

tower when the engine is cranking or running.

Red

Connects to a switched 12 volt source.

Black

Connects to ground on the engine.

Green

Connects to the coil negative (-) terminal.

Trigger Pickup Wires

White

If the distributor is triggered by breaker points or an amplifier, this wire needs to be

spliced to its trigger wire.

Violet

If the distributor uses a magnetic pickup, this wire needs to be spliced into the positive

mag pickup wire.

Figure 3 Wiring to a Points/Amplifier Ignition.

Similar Part No. - PN8728

Manufacturer	Part #	Datasheet	Description
Mallory performance clu...	PN87286	98Kb / 2P	Soft Touch Rev Control for Dirt Motorsports Racing Series

Manufacturer	Part #	Datasheet	Description
Mallory performance clu...	8728	369Kb / 8P	Soft Touch Rev Control
	PN87286	98Kb / 2P	Soft Touch Rev Control for Dirt Motorsports Racing Series
	8727CT	152Kb / 2P	Digital Soft-Touch HEI Rev Limiter
List of Unclassifed Man...	450-4010	185Kb / 2P	Soft Touch Knobs
E-SWITCH	TL9000	106Kb / 1P	TACT SWITCHES - SOFT TOUCH
Richco, Inc.	TCS-1	99Kb / 1P	TOUCH CONTROL SPACER
Skyworks Solutions Inc.	AAT2120	1Mb / 19P	Soft-Start Control
LSI Computer Systems	LS7232ND	48Kb / 5P	TOUCH CONTROL LAMP DIMMER
Shenzhen Huazhimei Semi...	HM233D	660Kb / 8P	Single touch control chip
LSI Computer Systems	LS7231	70Kb / 8P	TOUCH CONTROL LAMP DIMMER