CMS08

2013-11-01

2

Marking

Abbreviation Code

Part No.

S8

CMS08

Standard Soldering Pad

Handling Precaution

Schottky barrier diodes have reverse current characteristic compared to the other diodes.

There is a possibility SBD may cause thermal runaway when it is used under high temperature or high voltage.

voltage is applied. Please take forward and reverse loss into consideration during design.

The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be

exceeded during operation, even for an instant. The following are the general derating methods that we recommend

when you design a circuit with a device.

this temperature coefficient into account designing a device at low temperature.

This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation,

which seldom occurs during the lifespan of the device.

Derate this rating when using a device in order to ensure high reliability. We recommend that the

Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When

using a device, please design a circuit board and a soldering land size to match the appropriate thermal resistance

value.

Please refer to the Rectifiers databook for further information.

3.0

1.4

Unit: mm

1.4