26

sProduct Specifications

100V DC

150V AC/1 minute

20 cycles

1mA

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,

2 hours in each of the 3 directions.

sine half-wave waveform, 3 cycles in each of the 3 axis.

96 hours at temperature of 40ç and humidity of 90% to 95%

5 cycles under conditions as follows; Temperature:

-40ç / 15 to 35ç / 85ç / 15 to 35ç,

Time: 30 / 5 max. / 30 / 5 max.(minutes)

Reflow: At the recommended temperature profile

Manual soldering: 350±5ç for 3 seconds

Applicable FPC

t=0.17

Tin-lead plating

+0.03

-0.04

Item

1.Insulation resistance

2.

Withstanding voltage

4.Durability

(Insertion/withdrawal)

3.Contact resistance

5.Vibration

6.Shock

7.Humidity

(Steady state)

8.Temperature cycle

9.Resistance to

soldering heat

Specification

500M ohms minimum

No flashover or insulation breakdown.

50m ohms maximum

Contact resistance : 50m ohms maximum

No damage, cracks, or parts dislocation.

No electrical discontinuity of 1µs or more

Contact resistance: 50m ohms maximum.

No damage, cracks, or parts dislocation.

No electrical discontinuity of 1µs or more

Contact resistance: 50m ohms maximum

No damage, cracks, or parts dislocation.

Contact resistance: 50m ohms maximum

Insulation resistance: 50M ohms minimum

No damage, cracks, or parts dislocation.

Contact resistance: 50m ohms maximum

Insulation resistance: 50M ohms minimum

No damage, cracks, or parts dislocation.

No deformation of components affecting performance.

Conditions

(Note:4)

FH17L

- 30S - 0.5 SH (05)

1

2

3

4

5

6

sOrdering Information

Remarks

--------------

--------------

UL94V-0

UL94V-0

sMaterial

Part

Contact

Metal fittings

Insulated tape

Insulator

Insulator

Material

LCP

PPS

Phosphor bronze

Brass

Polyamide

Finish

--------------

--------------

Tin-lead plating

Tin-lead plating

--------------

2

3

4

5

6

1

Ratings

Current rating

Voltage rating

0.4A DC

50V AC

Operating temp. range

Operatinghumidity range

-40 to +70ç(Note.1)

relative humidity 90% max.

(No dew-fall)

Storage temp. range

Storage Humidity range

-10 to +50ç(Note.2)

relative humidity 90% max.

(No dew-fall)

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation.

Note 3. The above standards represent this series. The individual formal agreement should be based on the Specification.

Series Name

FH17

Mounting Type

None : On-Board type

L

: Offset type

LR

: Offset reverse type

Number of Contacts

8, 10, 15, 20, 24, 30

Contacts Pitch

0.5mm

Contact Style

SH : SMT horizontal mounting type

Plating specifications

Blank : Tin-lead plating

(05)

: Gold plating