Electronic Components Datasheet Search |
|
FH3-10S-1.25DS Datasheet(PDF) 1 Page - Hirose Electric |
|
FH3-10S-1.25DS Datasheet(HTML) 1 Page - Hirose Electric |
1 / 4 page D6 1.25mm Pitch FPC/FFC Connector FH3 Series sFeatures 1. 1.25mm FPC and FFC DIP Connector The contact pitch is 1.25mm. 2. Contact Reliability This connector has high contact reliability for high voltage contact. 3. Sixteen Types of Contact Numbers This connector consists of 16 kinds of 6, 8, 9, 10, 12, 13, 14, 15, 15, 17, 18, 19, 20, 21, 22, 24, and 30 contacts. sProduct Specifications Rating Rated Current: 1A Operating Temperature Range:-40~+85ç (Note 1) Storage Temperature Range:-10~+60ç (Note 2) Rated Voltage: 200V AC Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max. (Not dewed) (Not dewed) Applicable FPC t=0.2~0.35 Tin plating Note 1. Temperature rise included when energized Note 2. This storage indicates a long-term storage state for the unused product before board mounted. The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed in the board. Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification". sApplications HDD, facsimiles, printers, VTR, etc. Item Specification Condition 1. Insulation Resistance 500Mø min. Measured at 500V DC 2. Withstand voltage Neither short or breakdown should occur 500V AC for 1 minute 3. Contact Resistance 20mø max. Measured at 0.1A π FPC conductor resistance included 4. Mechanical operation Contact resistance: 40mø max. 30 cycles No part should be broken, cracked or loosened 5. Vibration No part should be broken, cracked or loosened Frequency: 10~55Hz and full amplitude 1.50mm in 3 directions for 2 hours, respectively 6. Shock No part should be broken, cracked or loosened Acceleration: 490m/S2, duration: 11ms, sine half-wave: in 3 directions for 3 times, respectively 7. Moisture Resistance in Steady State Insulation resistance: 50Mø min. Exposed to temperature 40ç and humidity 90~95% for 96 hours 5 cycles under conditions as follows; 8. Temperature Cycle No part should be broken, cracked or loosened Temperature: -55ç¡+15~+35¡+85¡+5~+35ç Time: 30¡5 max.¡ 30¡5 max. for 5 minutes |
Similar Part No. - FH3-10S-1.25DS |
|
Similar Description - FH3-10S-1.25DS |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |