SP6132HEU-L datasheet(6/14 Pages) SIPEX

Part #	SP6132HEU-L

Description	High Voltage Synchronous Buck Controller

Download	14 Pages

Scroll/Zoom	100%

Manufacturer	SIPEX [Sipex Corporation]

Direct Link	http://www.sipex.com

Logo

6 / 14 page

6

Date: 5/5/04

SP6132H Dual Supply, Synchronous Buck Controller

THEORY OF OPERATION: Continued

transconductance, there are many ways to com-

pensate the voltage loop or to control the COMP

pin externally. If a simple, single pole, single

zero response is required, then compensation

can be a simple as an RC to ground. If a more

complex compensation is required, then the

amplifier has enough bandwidth (45

° at 4 MHz)

and enough gain (60dB) to run Type III compen-

sation schemes with adequate gain and phase

margins at cross over frequencies greater than

50kHz.

The common mode output of the error amplifier

is 0.9V to 2.2V. Therefore, the PWM voltage

ramp has been set between 1.1V and 2.2V to

ensure proper 0% to 100% duty cycle capability.

The voltage loop also includes two other very

important features. One is an asynchronous start

up mode. Basically, the GL driver can not turn

on unless the GH driver has attempted to turn on

or the SS pin has exceeded 1.7V. This feature

prevents the controller from “dragging down”

the output voltage during startup or in fault

modes. The second feature is a 100% duty cycle

timeout that ensures synchronized refreshing of

the BST capacitor at very high duty ratios. In the

event that the GH driver is on for 20 continuous

clock cycles, a reset is given to the PWM flip

flop half way through the 21st cycle. This forces

GL to rise for the remainder of the cycle, in turn

refreshing the BST capacitor.

Gate Drivers

The SP6132H contains a pair of powerful 2

Ω

SOURCE and 1.5

Ω SINK drivers. These state

of the art drivers are designed to drive external

NFETs capable of handling up to 30A. Rise,

fall, and non-overlap times have all been minized

to achieve maximum efficiency. All drive pins

GH, GL & SWN are monitored continuously to

ensure that only one external NFET is ever on at

any given time.

90%

10%

RISE TIME

2V

NON-OVERLAP

FALL TIME

2V

90%

10%

GH(GL)

GL(GH)

GATE DRIVER TEST CONDITIONS

V(BST)

GH

Voltage

V(VCC)

V(SWN)

GL

Voltage

V(VIN)

0V

-0V

-V(Diode) V

V(VIN)+V(VCC)

BST

Voltage

V(VCC)

TIME

SWN

Voltage

Similar Part No. - SP6132HEU-L

Manufacturer	Part #	Datasheet	Description
Sipex Corporation	SP6132HEU-L	264Kb / 14P	High Voltage, 300KHz Synchronous PWM Controller
Sipex Corporation	SP6132HEU-L/TR	264Kb / 14P	High Voltage, 300KHz Synchronous PWM Controller

More results

Similar Description - SP6132HEU-L

Manufacturer	Part #	Datasheet	Description
International Rectifier	IR3651SPBF	1Mb / 19P	HIGH VOLTAGE SYNCHRONOUS PWM BUCK CONTROLLER
ON Semiconductor	CS5212	321Kb / 13P	Low Voltage Synchronous Buck Controller July, 2006 ??Rev. 4
	NCP1586	80Kb / 8P	Low Voltage Synchronous Buck Controller March, 2007 ??Rev. 0
	NCP1570	279Kb / 14P	Low Voltage Synchronous Buck Controller July, 2006 ??Rev. 5
Unisonic Technologies	UCS1201	166Kb / 5P	LOW VOLTAGE SYNCHRONOUS BUCK CONTROLLER
ON Semiconductor	NCP1589D	89Kb / 8P	Low Voltage Synchronous Buck Controller January, 2017 ??Rev. 2
	NCP81046	157Kb / 10P	Low Voltage Synchronous Buck Controller June, 2012 ??Rev. P0
	NCP1579	148Kb / 11P	Low Voltage Synchronous Buck Controller April, 2013 ??Rev. 3
	NCP1588	199Kb / 12P	Low Voltage Synchronous Buck Controller January, 2008 - Rev. 4
	NCP1589A	206Kb / 10P	Low Voltage Synchronous Buck Controller May, 2009 ??Rev. P4

More results

SP6132HEU-L Datasheet(PDF) 6 Page - Sipex Corporation

SP6132HEU-L Datasheet(HTML) 6 Page - Sipex Corporation

Similar Part No. - SP6132HEU-L

Similar Description - SP6132HEU-L

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Datasheet Download

Link URL