INTEGRAL MOTION SENSOR

• Passive infrared (PIR)

• Not intended to be mounted higher than 12 ft. (3.7m)

• Operation:

• Grouped with a wall control: Luminaire will operate in vacancy mode (manual-on/

auto-off)

• Not grouped with a wall control: Luminare will operate in occupancy mode

(auto-on/auto-off)

• Luminaires operate at full intensity until OneButton™ Setup is initiated by the Cree

Configuration Tool

AMBIENT LIGHT SENSOR

• Sensor response matches response of human eye

• Not intended to be mounted higher than 12 ft. (3.7m)

• Luminaires operate at full intensity until OneButton™ Setup is initiated by the Cree

Configuration Tool

• Daylight harvesting calibration performed automatically during OneButton™ Setup

INTEGRAL WIRELESS COMMUNICATION

• 2.4GHz wireless mesh technology with AES 128-bit encryption

• Self assigns to quietest channel during OneButton™ Setup

• Range:

• 30 ft. (9.1m) in typical commercial applications

• 300 ft. (91.4m) open air without obstructions

• Network: 250 devices max.

• Space: 100 devices max. per group

• FCC certified

• IC certified

LUMINAIRE

• Luminaires operate at full intensity until OneButton™ Setup is initiated by the Cree

Configuration Tool

• 10 year power fail memory of settings

DEPLOYMENT

at www.creelink.com/exLink.asp?23613564OH88E44I39771048

T

US: lighting.cree.com/lighting

T

Canada: www.cree.com/canada

Product Specifications

solution on the market. SmartCast Technology delivers up to 70% energy savings at up

to half the cost of other solutions. Luminaires combine best-in-class light with onboard

sensors and intelligence to deliver a better light experience. Extreme energy productivity,

code compliance and a better light experience without any extra design, installation or

setup work.

a patented approach that delivers an exclusive combination of 90+ CRI, beautiful light

characteristics, and lifelong color consistency, all while maintaining high luminous efficacy –

a true no compromise solution.

ROOM-SIDE HEAT SINK

An innovative thermal management system designed to maximize cooling effectiveness

by integrating a unique room-side heat sink into the diffusing lens. This breakthrough

design creates a pleasing architectural aesthetic while conducting heat away from LEDs

in a temperature-controlled environment. This enables the LEDs to consistently run

cooler, providing significant boosts to lifetime, efficacy, and color consistency.

CONSTRUCTION & MATERIALS

• Durable 22-gauge steel housing with standard troffer access plate for electrical

installation

• One-piece lower reflector finished with a textured high reflectance white polyester

powder coating creates a comfortable visual transition from the lens to the ceiling

plane

• Includes t-bar clips and holes for mounting support wires (by others)

OPTICAL SYSTEM

• Unique combination of reflective and refractive optical components achieves a

uniform, comfortable appearance while eliminating pixelation and color fringing

• Components work together to optimize distribution, balancing the delivery of high

illuminance levels on horizontal surfaces with an ideal amount of light on walls and

vertical surfaces. This increases the perception of spaciousness

• Diffusing lens integrated with upward-facing LED strip eliminates direct view of LEDs

while lower reflector balances brightness of lens with the ceiling to create a low-glare

high angle appearance

ELECTRICAL SYSTEM

• Integral, high-efficiency driver

• Power Factor: = 0.9 nominal

• Input Voltage: 120-277V, 50/60Hz

• Operating Temperature Range: 0˚C - + 35˚C (32˚F - + 95˚F)

• Total Harmonic Distortion: < 20%

• Dimming: 5% - 100%

REGULATORY & VOLUNTARY QUALIFICATIONS

• cULus Listed

• Suitable for damp locations

• Designed for indoor use

• UL924 (EB10W option)

• DLC qualified. Please refer to www.designlights.org/QPL for most current

information

• RoHS compliant. Consult factory for additional details

• Meets FCC Part 15 standards for conducted and radiated emissions