 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
ISO7220A Datasheet(PDF) 3 Page - Texas Instruments |
|
||||||||||||||||||||||||||||||
ISO7220A Datasheet(HTML) 3 Page - Texas Instruments |
|
|
3 / 35 page  ISO7220A, ISO7220B, ISO7220C, ISO7220M ISO7221A, ISO7221B, ISO7221C, ISO7221M www.ti.com SLLS755N – JULY 2006 – REVISED SEPTEMBER 2015 • Added the min and max values to the Storage temperature parameter in the Absolute Maximum Ratings table. ............... 5 • Changed in ROC table Max col, VIH row from VCC to 5.5 .................................................................................................... 6 • Changed the Device Options table, Input Threshold column from ≠ symbol to ~ symbol 6 places .................................... 19 • Changed the 7.4 title from IEC 60747 ~2 Insulation Characteristics to DIN EN ~ 5 Insulation Characteristics ................. 19 • Changed Isolation Glossary ................................................................................................................................................ 25 Changes from Revision K (January 2010) to Revision L Page • Changed Feature From: Operates with 3.3-V or 5-V Supplies To: Operates with 2.8-V (C-Grade), 3.3-V or 5-V Supplies . 1 • Changed Feature From: 4000-Vpeak Isolation, 560 Vpeak VIORM To: 4000-VPK VIOTM, 560 VPK VIORM per IEC 60747-5-2 (VDE 0884, Rev2) ................................................................................................................................................................. 1 • Added device options to VCC in the RECOMMENDED OPERATING CONDITIONS table ................................................... 6 • Changed Note: (1) in the RECOMMENDED OPERATING CONDITIONS table ................................................................... 6 • Changed ICC1 and ICC2 test conditions in the 5-V table........................................................................................................... 7 • Changed ICC1 and ICC2 test conditions in the VCC1 at 5 V, VCC2 at 3.3 V table........................................................................ 8 • Changed ICC1 and ICC2 test conditions in the VCC1 at 3.3 V, VCC2 at 5 V table........................................................................ 9 • Changed ICC1 and ICC2 test conditions in the VCC1 and VCC2 at 3.3 V table .......................................................................... 10 • Changed Table Note (1) ....................................................................................................................................................... 10 • Added ELECTRICAL and Switching CHARACTERISTICS table for VCC1 and VCC2 at 2.8 V (ISO722xC-Only) ................. 10 • Changed Figure 9 ................................................................................................................................................................. 15 • Changed Figure 14 ............................................................................................................................................................... 17 • Changed the CTI MIN value From: ≥175 V To: ≥400 V ....................................................................................................... 20 • Updated the Regulatory Information table............................................................................................................................ 20 Changes from Revision J (May 2009) to Revision K Page • Changed the RECOMMENDED OPERATING CONDITIONS so that Note (2) is associated with all device options in the Input pulse width and Signaling rate ................................................................................................................................ 6 • Changed Note (2) From: Typical signaling rate under ideal conditions at 25°C. To: Typical signaling rate and Input pulse width are measured at ideal conditions at 25°C. .......................................................................................................... 6 • Changed column 2 of the AVAILABLE OPTIONS table From: Signaling Rate To: Max Signaling Rate ............................. 19 Changes from Revision I (December 2008) to Revision J Page • Changed ISO7221C Marked As column From: TI7221C To: I7221C in the AVAILABLE OPTIONS table ......................... 19 Changes from Revision H (May 2008) to Revision I Page • Added "IEC 61010-1, IEC 60950-1 and CSA Approved" to the UL 1577 FEATURES bullet ................................................ 1 Changes from Revision G (March 2008) to Revision H Page • Added Note: (1) to the RECOMMENDED OPERATING CONDITIONS table ....................................................................... 6 • Added Note (1): to the ELECTRICAL CHARACTERISTICS: VCC1 and VCC2 at 3.3 V.......................................................... 10 Copyright © 2006–2015, Texas Instruments Incorporated Submit Documentation Feedback 3 Product Folder Links: ISO7220A ISO7220B ISO7220C ISO7220M ISO7221A ISO7221B ISO7221C ISO7221M |
Similar Part No. - ISO7220A_15 |
|
Similar Description - ISO7220A_15 |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
