Electronic Components Datasheet Search |
|
RPC56EL60L5BOSY Datasheet(PDF) 30 Page - STMicroelectronics |
|
RPC56EL60L5BOSY Datasheet(HTML) 30 Page - STMicroelectronics |
30 / 137 page Introduction RPC56EL60L5 30/137 DocID026934 Rev 1 1.5.37 Junction temperature sensor The junction temperature sensor provides a value via an ADC channel that can be used by software to calculate the device junction temperature. The key parameters of the junction temperature sensor include: Nominal temperature range from –40 to 150 °C Software temperature alarm via analog ADC comparator possible 1.5.38 Nexus Port Controller (NPC) The NPC module provides real-time development support capabilities for this device in compliance with the IEEE-ISTO 5001-2003. This development support is supplied for MCUs without requiring external address and data pins for internal visibility. The NPC block interfaces to the host processor and internal buses to provide development support as per the IEEE-ISTO 5001-2003 Class 3+, including selected features from Class 4 standard. The development support provided includes program trace, data trace, watchpoint trace, ownership trace, run-time access to the MCUs internal memory map and access to the Power Architecture internal registers during halt. The Nexus interface also supports a JTAG only mode using only the JTAG pins. The following features are implemented: Full and reduced port modes MCKO (message clock out) pin 4 or 12 MDO (message data out) pins(b) 2 MSEO (message start/end out) pins EVTO (event out) pin – Auxiliary input port EVTI (event in) pin 5-pin JTAG port (JCOMP, TDI, TDO, TMS, and TCK) – Supports JTAG mode Host processor (e200) development support features – Data trace via data write messaging (DWM) and data read messaging (DRM). This allows the development tool to trace reads or writes, or both, to selected internal memory resources. – Ownership trace via ownership trace messaging (OTM). OTM facilitates ownership trace by providing visibility of which process ID or operating system task is activated. An ownership trace message is transmitted when a new process/task is activated, allowing development tools to trace ownership flow. – Program trace via branch trace messaging (BTM). Branch trace messaging displays program flow discontinuities (direct branches, indirect branches, b. 4 MDO pins on LQFP144 package, 12 MDO pins on LFBGA257 package. |
Similar Part No. - RPC56EL60L5BOSY |
|
Similar Description - RPC56EL60L5BOSY |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |