Electronic Components Datasheet Search
  English  ▼

Delete All


Preview PDF Download HTML

AXP209 Datasheet(PDF) 15 Page - List of Unclassifed Manufacturers

Part No. AXP209
Description  Enhanced single Cell Li-Battery and Power System Management IC
Download  45 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  ETC2 [List of Unclassifed Manufacturers]

AXP209 Datasheet(HTML) 15 Page - List of Unclassifed Manufacturers

Zoom Inzoom in Zoom Outzoom out
 15 / 45 page
background image
Enhanced single Cell Li-Battery and Power System Management IC
9. Control and Operation
When AXP209 powers on and TWS interface SCK / SDA pins are pulled to host IO voltage source, the host
can then adjust and monitor the AXP209. This provides f
lexible adjustment and monitoring options, and a
wealth of information.
Note: "Host" Referring to the main application processor
Note: "External power supply" refers to ACIN And VBUS Inputs.
9.1 Power On / Off & Reset
AXP209 PWRON Pin can be connected to GND through a button, as a Power Enable Key (PEK) o
hibernation/wake button. The AXP209 can automatically identify long and short button presses and
react accordingly.
Power on Sources:
1. ACIN, VBUS, and battery
2. N_OE transition from high to low.
3. PEK press
Power On
System power-on is initiated whenever the following conditions occur:
1. When N_OE is low, and upon connection of a power supply that meets the requirements
(ACIN Or VBUS > 3.8V, and the battery voltage is higher than the shutdown voltage), AXP209
will automatically boot (Automatic booting on power supply connection can be configured by
the developer).
2. N_OE is low and the system is powered off, press PEK can power on AXP209. If required the
3. When there is a valid external power source or battery present and N_OE changes from high to
low, AXP209 will be turned on.
After power on, DC-DC and LDO will be soft booted in a preset timing sequence, and then either the
Host or PWREN the pin can enable/disable power.
Shutdown (Power off)
When you push-and-hold PEK longer than IRQLEVEL, HOST can write “1” into“REG32H [7]” to inform
AXP202 to shutdown, which can disable all power output except LDO1.
System power-off is initiated whenever the following conditions occur:
1. Input voltage is too low( Low-Power Protection)
2. Power output voltage is too low due to overload( Overload Protection)
Page 15/45

Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45 

Datasheet Download

Link URL

Privacy Policy
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com

Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn