Electronic Components Datasheet Search
  English  ▼

Delete All


Preview PDF Download HTML

MAX6427 Datasheet(PDF) 1 Page - Maxim Integrated Products

Part No. MAX6427
Description  Low-Power, Single/Dual-Level Battery Monitors with Hysteresis
Download  20 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  MAXIM [Maxim Integrated Products]
Homepage  http://www.maxim-ic.com

MAX6427 Datasheet(HTML) 1 Page - Maxim Integrated Products

Zoom Inzoom in Zoom Outzoom out
 1 / 20 page
background image
General Description
The MAX6427–MAX6438 are single/dual-level battery mon-
itors with internal hysteresis. These devices are offered with
single (MAX6427/MAX6428/MAX6429, MAX6433/
MAX6434/MAX6435) or dual (MAX6430/MAX6431/
MAX6432, MAX6436/MAX6437/MAX6438) low-battery out-
put indicators, which can be used to indicate three battery
conditions: battery is good (operate system in normal
mode), battery is weak (operate system in low-power
mode), or battery is empty (disable the system).
These devices are ideal for monitoring single lithium-ion
(Li+) cells or multicell alkaline/NiCd/NiMH power supplies.
When the power-supply voltage drops below the specified
low threshold, the low-battery output asserts. When the
voltage rises above the specified high threshold, the low-
battery output is deasserted following a 140ms minimum
timeout period. The timeout period ensures that the supply
voltages have stabilized before power-converter or micro-
processor activity is enabled.
The MAX6427–MAX6438 family is available with several
monitoring options. The MAX6427/MAX6428/MAX6429
offer factory-trimmed battery-monitor thresholds, with a sin-
gle low-battery output. The MAX6430/MAX6431/MAX6432
also feature factory-trimmed thresholds, but have two low-
battery outputs.
The MAX6433–MAX6438 have user-adjustable threshold
voltages permitting the user to select the hysteresis range,
and consequently the sensitivity of the system to noise. A
wide hysteresis range also prevents chattering that can
result due to battery recovery after load removal. Single
low-battery outputs are supplied by the MAX6433/
MAX6434/MAX6435 and dual low-battery outputs by the
The MAX6427–MAX6438 family is available with three out-
put logic options for convenient interface with system
power circuitry or microprocessors. The family is offered in
small SOT23 and SOT143 packages and is fully specified
over temperature.
Battery-Powered Systems (Single-Cell Li+ or
Two/Three-Cell NiMH, NiCd, Alkaline)
Cell Phones/Cordless Phones
Portable Medical Devices
Electronic Toys
MP3 Players
o Factory-Trimmed or User-Adjustable Threshold
Factory-Trimmed Low Thresholds from 1.6V to
2.1V or 2.6V to 3.1V in 100mV Increments
Factory-Trimmed High Thresholds from 2.3V to
2.6V or 3.3V to 3.6V in 100mV Increments
User-Adjustable Low/High Thresholds with
615mV Internal Reference (MAX6433–MAX6438)
o Low Current (1µA, typ)
o Single or Dual Low-Battery Outputs
o Push-Pull LBO, Open-Drain LBO, and Open-Drain
LBO Options
o 140ms Minimum LBO Timeout Period
o Immune to Short Battery Voltage Transients
o Guaranteed Valid LBO Logic State to BATT = 1.0V
o -40°C to +85°C Operating Temperature Range
o Small 3, 4, 5 and 6-Pin SOT Packages
o No External Components Required
Low-Power, Single/Dual-Level Battery Monitors
with Hysteresis
________________________________________________________________ Maxim Integrated Products
19-2323; Rev 1; 9/03
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Ordering Information
Typical Operating Circuit appears at end of data sheet.
MAX6427_ _UR-T
-40°C to +85°C
3 SOT23-3
Ordering Information continued at end of data sheet.
Pin Configurations continued at end of data sheet.
The MAX6427–MAX6432 are available with factory-trimmed
battery-monitor thresholds. Select the desired thresholds
using Tables 1 or 2 and enter the corresponding letters in
the part number by replacing “_ _”.
Note: There are 26 standard versions with a required order
minimum of 2500 pieces. Sample stock is generally held on
the standard versions only (see Standard Versions Table).
Required order increment is 10,000 pieces for nonstandard
versions. Contact factory for availability. All devices avail-
able in tape-and-reel only.
( ) ARE FOR THE MAX6429.
Pin Configurations

Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20 

Datasheet Download

Link URL

Privacy Policy
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com

Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn