Electronic Components Datasheet Search |
|
PLED96W-069-C1400-XX-HV Datasheet(PDF) 1 Page - List of Unclassifed Manufacturers |
|
PLED96W-069-C1400-XX-HV Datasheet(HTML) 1 Page - List of Unclassifed Manufacturers |
1 / 4 page Specifications subject to change without notice. Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com Constant Current Versions - Specifications Model Number Output Current (mA ±5%) Output Voltage Range (Vdc) Max. Output Power (W) Max Efficiency PLED96W-274-C0350-XX-HV 350 92-274 96 88% PLED96W-213-C0450-XX-HV 450 71-213 96 88% PLED96W-137-C0700-XX-HV 700 46-137 96 86% PLED96W-092-C1050-XX-HV 1050 31-92 96 86% PLED96W-069-C1400-XX-HV 1400 23-69 96 86% PLED96W-054-C1750-XX-HV 1750 18-54 96 85% PLED96W-048-C2000-XX-HV 2000 16-48 96 85% PLED96W-046-C2100-XX-HV 2100 16-46 96 85% PLED96W-039-C2450-XX-HV 2450 14-39 96 84% PLED96W-036-C2660-XX-HV 2660 12-36 96 84% PLED96W-034-C2800-XX-HV 2800 12-34 96 84% PLED96W-030-C3150-XX-HV 3150 10-30 96 84% PLED96W-027-C3500-XX-HV 3500 9-27 96 83% PLED96W-025-C3840-XX-HV 3840 9-25 96 83% PLED96W-024-C4000-XX-HV 4000 8-24 96 81% PLED96W-020-C4800-XX-HV 4800 7-20 96 81% PLED96W-018-C5350-XX-HV 5350 6-18 96 81% Constant Voltage Versions - Specifications Model Number Output Voltage (Vdc ±5%) Output Current Range (mA) Max. Output Power (W) Max Efficiency PLED96W-018-HV 18 1338-5350 96 81% PLED96W-020-HV 20 1200-4800 96 81% PLED96W-024-HV 24 1000-4000 96 81% PLED96W-025-HV 25 960-3840 96 83% PLED96W-027-HV 27 875-3500 96 83% PLED96W-030-HV 30 788-3150 96 84% PLED96W-034-HV 34 700-2800 96 84% PLED96W-036-HV 36 665-2660 96 84% PLED96W-039-HV 39 613-2450 96 84% PLED96W-046-HV 46 525-2100 96 85% PLED96W-048-HV 48 500-2000 96 85% PLED96W-054-HV 54 438-1750 96 85% PLED96W-069-HV 69 350-1400 96 86% PLED96W-092-HV 92 263-1050 96 86% PLED96W-137-HV 137 175-700 96 86% PLED96W-213-HV 213 113-450 96 88% PLED96W-274-HV 274 88-350 96 88% Class 2: US/Canada US Only -XX indicates dimming options are available. See options below. Blank = fixed current output Electrical Specifications Input Voltage Range: 277-480 Vac Nom. (XX-512 V Min/Max) Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ 60% load 277V-347V, 80% load 480V Inrush Current: <30.0 Amps max @ 277 Vac, cold start 25ºC Input Current: 0.45 Amps max Maximum Power: 96W Current Regulation: ± 3% Over input line variation Load Regulation: ± 4% THD: <_ 20% @ 60% load, 277V through 480V Ripple & Noise: (Vpk-pk) 5% Vo max @ 20 MHz BW, Full load output in parallel with 0.1 μF ceramic & 10 μF Electrolytic Ripple: (Ipk-pk) 5% Io max @ 20 MHz BW, Full load output in parallel with 0.1 μF ceramic & 10 μFElectrolytic. 120 Hz component (Flicker Free) Start-up Time: 200mS typical @ Full Load, 120Vac/60Hz (1000mS max) Leakage Current: 700μA typical Hold Up Time: Half cycle Output Protection: Over-Voltage, Over-Current, and Short Circuit Protection with Auto Recovery, plus internal thermal protection Environmental Specifications Minimum Starting Temp: -30ºC Maximum Case Temp. 90°C Storage Temperature: -40ºC to +85ºC Humidity: 5% to 95% Cooling: Convection Vibration Frequency: 5 to 55 Hz/2g, 30 minutes Sound Rating: Class A Impact Resistance: 1g/s MTBF: 474,000 Hours @ full load and 40ºC ambient conditions per MIL-217F Notice 2 EMC: FCC 47CFR Part 15 Class B compliant Weight: 32.1 oz. (910 grams) PLED-96W-HV Series– High Voltage Flicker-free, Hazardous Location LED Drivers Constant Current, Dimmable & Constant Voltage with Isolation Black Magic Thermal Advantage™ Aluminum Housing • Total Power: 96 Watts • Input Voltage: 277-480 Vac Nom. • UL Dry & Damp Location Rated • UL Type HL • IP66 & NEMA6 • High Power Factor • UL Type HL Rated for Hazardous Locations Rev 8-26-15 Ordering Options: -D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3. -D3: 3-wire dimmable models dim 100-10%. Three extra wires on the output side (Yellow/Purple/Gray). Compatible with potentiometer dimming. See page 3. -PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4. E332160 |
Similar Part No. - PLED96W-069-C1400-XX-HV |
|
Similar Description - PLED96W-069-C1400-XX-HV |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |