PC910L0NSZ

Series

1. Recognized by UL1577 (Double protection isolation),

file No. E64380 (as model No. PC910L)

2. Approved by VDE (VDE0884) (as an option), file No.

87446 (as model No. PC910L)

3. Package resin : UL flammability grade (94V-0)

■ Features

■ Agency approvals/Compliance

1. High speed interfaces for computer peripherals

2. Programmable controllers

3. Inverter

■ Applications

High Speed 10Mb/s, High CMR

DIP 8 pin ∗OPIC

Photocoupler

1. DIP 8 pin package

2. Double transfer mold package

(Ideal for Flow Soldering)

3. High speed response

5. Instantaneous common mode rejection voltage

6. TTL and LSTTL compatible output

7. High isolation voltage between input and output

■ Description

PC910L0NSZ Series contains a LED optically cou-

pled to an OPIC chip.

It is packaged in a 8 pin DIP.

Input-output isolation voltage(rms) is 5.0kV, High

speed response (TYP. 10 Mb/s) and CMR is MIN.

10 kV/

µs.

1

Sheet No.: D2-A05601EN

Date Nov. 28. 2003

© SHARP Corporation

Notice The content of data sheet is subject to change without prior notice.

In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP

devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

PC910L0NSZ Series

∗ "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing

circuit integrated onto a single chip.