Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

INA-30311 Datasheet(PDF) 4 Page - Agilent(Hewlett-Packard)

Part No. INA-30311
Description  1 GHz Low Noise Silicon MMIC Amplifier
Download  6 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  HP [Agilent(Hewlett-Packard)]
Homepage  http://www.home.agilent.com
Logo HP - Agilent(Hewlett-Packard)

INA-30311 Datasheet(HTML) 4 Page - Agilent(Hewlett-Packard)

  INA-30311 Datasheet HTML 1Page - Agilent(Hewlett-Packard) INA-30311 Datasheet HTML 2Page - Agilent(Hewlett-Packard) INA-30311 Datasheet HTML 3Page - Agilent(Hewlett-Packard) INA-30311 Datasheet HTML 4Page - Agilent(Hewlett-Packard) INA-30311 Datasheet HTML 5Page - Agilent(Hewlett-Packard) INA-30311 Datasheet HTML 6Page - Agilent(Hewlett-Packard)  
Zoom Inzoom in Zoom Outzoom out
 4 / 6 page
background image
6-143
INA-30311 Applications
Information
Introduction
The INA-30311 is a silicon RF
integrated circuit that provides an
easy-to-use solution for low noise
or multi-purpose gain block
applications up to 1000 MHz. This
two-stage amplifier design uses
resistive feedback to provide flat
gain over a wide frequency range.
This device is assembled in a
miniature, surface mount package
and is intended for use in low
cost wireless communication
products.
A unique feature of the INA-30311
is that it is designed with a 50
input impedance and an output
impedance that approaches 200
at lower frequencies. This imped-
ance converting feature is very
useful for applications such as
receiver IF circuits in which the
INA-30311 is followed by high
input impedance devices like
signal processing circuits, filters,
or mixed signal ICs.
In addition to simplifying the
match to higher impedance
devices, a key benefit of the
higher output impedance feature
is an improvement in power
efficiency.
Phase Reference Planes
The positions of the reference
planes used to measure
S-Parameters are shown in
Figure 9. As seen in the illustra-
tion, the reference planes are
located at the point where the
package leads contact the test
circuit.
REFERENCE
PLANES
TEST CIRCUIT
INA-30
MATCHED
50
Ω OUTPUT
INA-30
INA-30
50
INPUT
HIGH Z
OUTPUT
Biasing
The INA-30311 is a voltage biased
device and operates from a single
+3 volt power supply. With a
current drain of 6 mA, this
amplifier is suitable for use in
battery powered applications. All
bias circuitry is fully integrated
into the IC eliminating the need
for external DC components. RF
performance is very stable for
3-volt battery supplies that may
range from 2.7 to 3.3 volts,
depending on battery “freshness”
or state of charge in the case of
rechargeable batteries.
While the INA-30311 was
designed for use in +3 volt battery
powered applications, the
internal bias regulation circuitry
allows it to be used with any
power supply voltage from +2.7
to +5 volts.
Typical Configurations
The way in which the INA-30311
is used depends on the particular
application and operating
frequency.
• For receiver IF amplifier appli-
cations up to several hundred
MHz, the relatively higher out-
put impedance level of the
INA-30311 may be used to
advantage when interfacing
directly with devices having
higher than 50
Ω input imped-
ances, such as certain signal
processing or mixed signal ICs.
This application is shown in
Figure 10.
• A second implementation,
shown in Figure 11, uses a
simple reactive network at the
amplifier’s output to match the
output impedance to 50
Ω.
This matched output arrangement
will provide an additional 0.9 dB
of gain and output power at
900 MHz when driving into a 50
stage.
• The third way to use the INA-
30311 is to simply cascade
several INA-30311’s with 50
stages and neglect the effects of
the output mismatch.
The 50
Ω cascade without
impedance matching, shown in
Figure 12, trades off the
improvement in stage gain and
output power for a more
simplified interstage circuit and
reduced circuit board space.
Figure 11. Impedance Matched
Output.
Figure 12. Simple Cascade without
Impedance Matching.
Figure 9. Reference Planes.
HIGH INPUT
IMPEDANCE
STAGE
INA-30
Figure 10. INA-30311 Driving a High
Input Impedance Stage.


Html Pages

1  2  3  4  5  6 


Datasheet Download

Go To PDF Page

Related Electronics Part Number

Part NumberComponents DescriptionHtml ViewManufacturer
INA-503111 GHz Low Noise Silicon MMIC Amplifier 1 2 3 4 5 Agilent(Hewlett-Packard)
INA-510632.4 GHz Low Noise Silicon MMIC Amplifier 1 2 3 4 5 Agilent(Hewlett-Packard)
INA-520631.5 GHz Low Noise Silicon MMIC Amplifier 1 2 3 4 5 MoreAgilent(Hewlett-Packard)
INA-540633.0 GHz Low Noise Silicon MMIC Amplifier 1 2 3 4 5 MoreAgilent(Hewlett-Packard)
HMC318MS8GGaAs MMIC LOW NOISE AMPLIFIER with AGC 5.0 - 6.0 GHz 1 2 3 4 5 MoreHittite Microwave Corporation
HMC320MS8GGaAs MMIC LOW NOISE AMPLIFIER 5.0 - 6.0 GHz 1 2 3 4 5 MoreHittite Microwave Corporation
HMC462GaAs PHEMT MMIC LOW NOISE AMPLIFIER 2.0 - 20.0 GHz 1 2 3 4 5 MoreHittite Microwave Corporation
AA035N1-0028-36 GHz GaAs MMIC Low Noise Amplifier 1 2 3 Alpha Industries
CMM40002.0-18.0 GHz GaAs MMIC Low Noise Amplifier 1 2 3 4 5 MoreList of Unclassifed Manufacturers
CMM11002.0-18.0 GHz GaAs MMIC Low Noise Amplifier 1 2 3 4 5 MoreMimix Broadband

Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn