LMC7211-N

www.ti.com

SNOS746F – MAY 2004 – REVISED JANUARY 2013

LMC7211 Tiny CMOS Comparator with Rail-to-Rail Input and Push-Pull Output

Check for Samples: LMC7211-N

1

FEATURES

APPLICATIONS

2

•

Tiny SOT 23-5 package saves space

•

Battery Powered Products

•

Package is less than 1.43 mm thick

•

Notebooks and PDAs

•

Guaranteed specs at 2.7V, 5V, 15V supplies

•

PCMCIA cards

•

Typical supply current 7

μA at 5V

•

Mobile Communications

•

Response time of 4

μs at 5V

•

Alarm and Security circuits

•

Push-pull output

•

Direct Sensor Interface

•

Input common-mode range beyond V

− and V+

•

Replaces amplifiers used as comparators with

better performance and lower current

•

Low input current

DESCRIPTION

The LMC7211 is a micropower CMOS comparator available in the space saving SOT23-5 package. This makes

the comparator ideal for space and weight critical designs. The LMC7211 is supplied in two offset voltage

grades, 5 mV and 15 mV.

The main benefits of the Tiny package are most apparent in small portable electronic devices, such as mobile

phones, pagers, notebook computers, personal digital assistants, and PCMCIA cards. The rail-to-rail input

voltage makes the LMC7211 a good choice for sensor interfacing, such as light detector circuits, optical and

magnetic sensors, and alarm and status circuits.

The Tiny Comparator's outside dimensions (length x width x height) of 3.05mm x 3.00mm x 1.43mm allow it to fit

into tight spaces on PC boards.

See the LMC7221 for a comparator with an open-drain output.

CONNECTION DIAGRAM

Figure 1. 8-Pin SOIC-8

Figure 2. 5-Pin SOT23-5

Top View

Top View

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2

All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Copyright © 2004–2013, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.