An Oplink Company

Pb

TRPE48-E2G SM Multi-rate

The TRPE48-E2G SFP series of multi-rate ber optic transceivers with

digital diagnostics monitoring functionality provide a quick and reliable

interface for short reach (SR), intermediate reach (IR) and long reach (LR)

applications. Diagnostics monitoring functionality (alarm and warning

features) is integrated into the design via an I2C serial interface per the

Multi-Source Agreement (MSA) SFF-8472, Rev. 9.4.

Products under this series are compatible with SONET/ SDH standards for

OC-48/STM-16 (2.488Gb/s) SR-1/I-16 short reach, IR-1/S-16.1 & IR-2/S-16.2

intermediate reach and LR-1/L-16.1 & LR-2/L-16.2 long reach applications,

OC-3/STM-1 (156Mb/s) and OC-12/STM-4 (622Mb/s) SR/I-1 and I-4 short

reach applications; Gigabit Ethernet LX (1.25Gb/s) applications per IEEE

802.3; and Fibre Channel 200-SM-LC-L (2.125Gb/s) and 100-SM-LC-L

(1.062Gb/s) applications per FC-PI standards. The transceivers support

data rates ranging from 2.67Gb/s down to 125Mb/s. All modules satisfy

Class I Laser Safety requirements in accordance with the U.S. FDA/CDRH

and international IEC-60825 standards.

The TRPE48-E2G multi-rate transceivers connect to standard 20-pad

SFP connectors for hot plug capability. This allows the system designer

to make con guration changes or maintenance by simply plugging in

di erent types of transceivers without removing the power supply from

the host system.

The transceivers have colored bail-type latches, which o er an easy and

convenient way to release the modules. The latch is compliant with the

SFP MSA.

The transmitter and receiver DATA interfaces are AC-coupled internally.

LV-TTL Transmitter Disable control input and Loss of Signal output

interfaces are also provided.

The transceivers operate from a single +3.3V power supply over operating

case temperature ranges of -5°C to +70°C (Commercial), -5°C to +85°C

(Extended) or -40°C to +85°C (Industrial). The housing is made of metal

for EMI immunity.

Pro d uc t D es c rip tio n

þ

Operating Bit Rate of 125Mb/s to 2.67Gb/s

þ

Lead Free Design & Fully RoHS Compliant

þ

Compatible with SONET/SDH OC-48/STM-16

þ

Compatible with Gigabit Ethernet LX

þ

Compatible with Fibre Channel 200-SM-LC-L and

100-SM-LC-L

þ

Compatible with Gigabit Ethernet LX

þ

Compatible with Fibre Channel 200-SM-LC-L and

100-SM-LC-L

þ

Digital Diagnostics through Serial Interface

þ

Internal Calibration for Digital Diagnostics

þ

APD Receiver for Long Reach Applications

þ

Eye Safe (Class I Laser Safety)

þ

Duplex LC Optical Interface

þ

Hot-pluggable

þ

TX Fault & Loss of Signal Outputs

þ

TX Disable Input

F eatures

Parameter

Symbol

Minimum

Maximum

Units

Storage Temperature

T

ST

- 40

+ 85

°C

Commercial

T

OP

- 5

+ 70

°C

Extended

- 5

+ 85

Industrial

- 40

+ 85

Supply Voltage

V

CC

0

+ 5.0

V

Maximum Input Optical Power (30 seconds max.)

P

in,max

-

+ 3.0

dBm

Input Voltage

V

IN

0

V

CC

V

1

Measured on top side of SFP module at the front center vent hole of the cage.

A bsolute Maximum R atings

S0221, Rev.02

2011-03-24

Multi-rate OC-48/STM-16 SFP Transceivers with

Digital Diagnostics