An Oplink Company

Parameter

Symbol

Minimum

Maximum

Units

Storage Temperature

T

st

- 40

+ 85

°C

“COM”

T

op

- 5

+ 70

°C

“IND”

- 40

+ 85

Supply Voltage

V

cc

0

+ 5.0

V

Input Voltage

V

in

0

V

cc

V

1

Measured on top side of SFP module at the front center vent hole of the cage.

A bsolute Maximum R atings

OC-3/STM-1 SFP

Transceivers with Digital Diagnostics

TRPE03-E1 Single Mode

The TRPE03-E1 SFP series of fiber optic transceivers w ith integrated

digital diagnostics monitoring functionality provide a quick and reliable

interface for short reach (SR),intermediate reach (IR)and long reach (LR)

applications. The diagnostic functions,alarm and w arning features as

described in the Multi-Source Agreement (MSA) document, SFF-8472

Available products under this series are compliant w ith applicable SONET/

SDH standards for OC-3/STM-1. All modules satisfy Class I Laser Safety

requirements in accordance w ith the U.S. FDA/CDRH and international

IEC-60825 standards.

The TRPE03-E1 transceivers connect to standard 20-pad SFP connectors

for hot plug capability. This allow s the system designer to make

configuration changes or maintenance by simply plugging in different

types of transceivers w ithout removing the pow er supply from the host

system.

The transceivers have colored bail-type latches,w hich offer an easy and

convenient w ay to release the modules. The latch is compliant w ith the

SFP MSA.

The transmitter design incorporates a highly reliable 1310nm or 1550nm

InG aAsP laser and a driver circuit. The receiver features a transimpedance

amplifier IC optimized for high sensitivity and w ide dynamic range. The

transmitter and receiver DATA interfaces are AC-coupled internally. LVTTL

Transmitter Disable control input and Loss of Signal output interfaces are

also provided.

The transceivers operate from a single +3.3V pow er supply over tw o

operating case temperature ranges of -5°C to +70°C (COM),or -40°C to

+85°C (IND). The housing is made of metal for EMI immunity.

Produ c t D es c rip tion

þ

Compatible w ith SFP MSA

þ

Compliant w ith SONET/SDH OC-3/STM-1

(155Mb/s)

þ

SONET/SDH Reaches (SR-1,IR-1,LR-1 & LR-2)

þ

Digital Diagnostics through Serial Interface

þ

Internal Calibration for Digital Diagnostics

þ

Eye Safe (Class I Laser Safety)

þ

Duplex LC Optical Interface

þ

-40°C to +85°C Operating Case Temperature

Option

þ

Excellent EMI & ESD Protection

þ

H ot-pluggable

þ

TX Fault & Loss of Signal Outputs

þ

TX Disable Input

þ

Single +3.3V Pow er Supply

F ea tu res

21737-0969,Rev.A

2008-11-11