![]() |
Electronic Components Datasheet Search |
|
AD024-10 Datasheet(PDF) 4 Page - List of Unclassifed Manufacturers |
|
AD024-10 Datasheet(HTML) 4 Page - List of Unclassifed Manufacturers |
4 / 12 page ![]() Appendix - 134 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 Recommended Solder Reflow Profile NVE recommends the following soldering profile : 300 For leaded (Pb) parts, the peak temperature shown in this profile can be decreased to as low as 230°C. Exceeding 265°C at peak or the time at peak temperature shown in this profile can damage the parts. Specifically: 1. AA- and AD-Series sensors are rated at 150°C maximum storage temperature. They can withstand the solder profile shown above with no harmful effects. However, temperatures above 265°C for even a brief period or extended periods above 160°C can cause degradation of the GMR sensor element. 2. AKL- and DD-Series parts contain an on-chip EEPROM. Exposure to temperatures in excess of 265°C can cause EEPROM data corruption, which will cause the parts to fall out of specification. |
|