Product Specification

PE42720

Page 4 of 11

©2010-2013 Peregrine Semiconductor Corp. All rights reserved.

Electrostatic Discharge (ESD) Precautions

the same precautions that you would use with

other ESD-sensitive devices. Although this device

contains circuitry to protect it from damage due to

ESD, precautions should be taken to avoid

exceeding the specified rating.

Latch-Up Avoidance

devices are immune to latch-up.

Table 5. Truth Table

Moisture Sensitivity Level

The Moisture Sensitivity Level rating for the

PE42720 in the 20-lead 4x4 mm LGA package is

MSL3.

Note 1:

CTRL1 = HIGH and CTRL2 = High are not supported

CTRL1

CTRL2

RFC – RF1

RFC – RF2

Low

Low

OFF

OFF

Low

High

OFF

ON

High

Low

ON

OFF

High

High

Switching Frequency

The PE42720 has a maximum 25 kHz switching

rate.

Switching frequency describes the time duration

between switching events. Switching time is the

time duration between the point the control signal

reaches 50% of the final value and the point the

output signal reaches within 10% or 90% of its

target value. Switching time is provided in Table 1.

Spurious Performance

The typical spurious performance of the PE42720

is –155 dBm.

Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com